Yamaha CRW4260t-B Technical Information download pdf (Page 192)

Power Macintosh Blue & White G3 — Mbox Requirements

All Blue & White G3 Models Supported

Mac OS 9.1, 9.2, 9.2.1 or 9.2.2 required (Mac OS 9.2.2 recommended)

QuickTime 5.0 or higher required with Pro Tools v5.2

The QuickTime 5.0.2 installer is supplied on your Pro Tools CD

MIDI:

Both USB and serial MIDI interfaces work effectively with Pro Tools. Digidesign recommends

using a serial MIDI interface, as they offer the tightest possible MIDI timing. Serial MIDI

interfaces require either a Mac serial port or a qualified modem-to-serial port adapter.

Digidesign currently supports the GeeThree Stealth Port or Griffin gPort installed in the modem

port (thereby not using a PCI slot).

When using the GeeThree products, version 1.0.3 or higher of the Stealth Port extension is

required, available here: http://www.geethree.com/download.html

External Floppy Diskette Drive

Although not required with Pro Tools installation, an external floppy diskette drive may be

required for some Plug-Ins installations. The following external USB diskette drives are currently

supported:

● Imation SuperDisk

● NewerTechnology uDrive

● SmartDisk (VST) Floppy Drive (model FDUSB-M) Note: Information on VST brand

products from SmartDisk can be found at: www.smartdisk.com

Links to software and drivers are available in the Digidesign Support/Downloads/Utilities Section:

● SmartDisk (VST) Floppy Drive (model FDUSB-M)

● Imation SuperDisk

● NewerTechnology uDrive

● PACE USB Floppy Enabler

Apple's revised USB support allows for booting from a USB drive, therefore you should not boot

up your system with an authorization disk inserted in the USB Drive.

Hard Drives — Audio Storage Requirements

For information on ATA/IDE, Firewire, and SCSI Drives:

Refer to the

Pro Tools LE Audio Storage Requirements page.

SCSI HBA Card NOT required:

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 241 242

No comments

Yamaha CRW4260t-B Technical Information Page 192