Yamaha CRW4260t-B Technical Information Page 187

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 186
products from SmartDisk can be found at: www.smartdisk.com
Links to software and drivers are available in the Digidesign Support/Downloads/Utilities Section:
SmartDisk (VST) Floppy Drive (model FDUSB-M)
Imation SuperDisk
NewerTechnology uDrive
PACE USB Floppy Enabler
Apple's revised USB support allows for booting from a USB drive, therefore you should not boot
up your system with an authorization disk inserted in the USB Drive.
Hard Drives — Audio Storage Requirements
For information on ATA/IDE, Firewire, and SCSI Drives:
Refer to the
Pro Tools LE Audio Storage Requirements page.
SCSI HBA Card NOT required:
Although Pro Tools LE supports a full 24 tracks of record and playback on a dedicated ATA/IDE
or Firewire hard drive, use of a SCSI HBA card with a SCSI drive is also supported. Optional
SCSI HBA cards bundled (by Apple) with Power Macintosh computers are not compatible with
this configuration due to the lack of NV RAM to store Pro Tools desired SCSI transfer rate.
The following SCSI HBA cards are qualified with the G4 with Mbox & Pro Tools LE:
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA, also
available in the Digidesign SCSI64 Kit) with the following requirements:
ATTO ExpressPCI Firmware v1.4.4 f1, available at:
http://www.digidesign.com/download/ptutil.html
ATTO ExpressPro-Tools v2.3.2 (supplied on Pro Tools CD) or higher with Synch Transfer
Rate set to 20 (10) and PCI Burst Rate set to 32 bytes
Note: Mac OS 9.2 requires ATTO ExpressPro-Tools v2.7 or higher, available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA 2906 with the following requirements:
Firmware v1.1
PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the Control Panel
Adaptec files are available at: http://www.adaptec.com/worldwide/support/driverindex.html
Known Issues
Mac OS X and "Classic" mode NOT Supported
Pro Tools (any version) will not work with OS X or in Classic mode. It is necessary that
Page view 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 241 242

Comments to this Manuals

No comments