The following SCSI HBA cards are qualified for use with Blue & White G3s
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA, also
available in the Digidesign SCSI64 Kit) with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1 or higher
● Available at: http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to 20 (10) and PCI
Burst Rate set to 32 bytes
● ATTO ExpressPro-Tools v2.3.2 supplied on Pro Tools v5.1 or 5.1.1 installation CD-ROM
● Note: Mac OS 9.2 requires ATTO ExpressPro-Tools v2.7 or higher, available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA cards including:
● 2906
● 2940UW
● 2940U2W
● 3940UW
with the following requirements:
● Firmware v4.1 (or v1.1 for the 2906)
● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the Control Panel
● Current Adaptec drivers are available at:
http://www.adaptec.com/worldwide/support/driverindex.html
● Previous drivers are available at: ftp.adaptec.com/mac/scsi/
Digidesign Compatibility Documents Index
Comments to this Manuals