Yamaha CRW4260t-B Technical Information Page 163

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 162
your Digi 001 system: for more information refer to the Audio Storage Requirements page.
Optional SCSI HBA cards bundled (by Apple) with Power Macintosh computers are not
compatible with this configuration due to the lack of NV RAM to store Pro Tools desired SCSI
transfer rate.
The following SCSI HBA cards are qualified with the G4 models listed at the top of this page:
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA, also
available in the Digidesign SCSI64 Kit) with the following requirements:
ATTO ExpressPCI Firmware v1.4.4 f1 or higher
Available at: http://www.digidesign.com/download/ptutil.html
ATTO ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to 20 (10) and PCI
Burst Rate set to 32 bytes
ATTO ExpressPro-Tools v2.3.2 supplied on Pro Tools v5.1 or 5.1.1 installation CD-ROM
Note: Mac OS 9.2 requires ATTO ExpressPro-Tools v2.7 or higher, available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA 2906 with the following requirements:
Firmware v1.1
PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the Control Panel
Adaptec files are available at: http://www.adaptec.com/worldwide/support/driverindex.html
MIDI:
Both USB and serial MIDI interfaces work effectively with Pro Tools. Digidesign recommends
using a serial MIDI interface, as they offer the tightest possible MIDI timing. Serial MIDI
interfaces require either a Mac serial port or a qualified modem-to-serial port adapter.
Digidesign currently supports the GeeThree Stealth Port for G4 - AGP Video (Sawtooth), Stealth
Port for Dual Processor G4s, or Griffin g4Port installed in the modem port (thereby not using a
PCI slot).
When using the GeeThree products with OS 9.0.4, version 1.0.3 or higher of the Stealth Port
extension is required, available here: http://www.geethree.com/download.html
Digidesign supports the following MIDI Interfaces for use with the 2001 models of Apple's G4s
and Pro Tools® 5.1 or higher:
MOTU Fastlane (USB)
Opcode MIDIport32 2x2 (USB)
AMT8 (USB/Serial)
Digi 001 MIDI ports (with Pro Tools LE only)
While full testing will not be performed with older Pro Tools versions or older CPUs, we do not
anticipate problems using these MIDI Interfaces.
Dual Monitor AGP Graphics Cards
Page view 162
1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 241 242

Comments to this Manuals

No comments