TS-Manager
Applicable controllers
TS-S
TS-X
TS-P
Besides basic functions, such as point data edit and backup, support software TS-Manager incorporates various convenient functions for
analysis and debugging the system efciently. The TS-Manager helps you with application motion proles, system setup and saving system
parameters.
Features
1 Basic functions
Detailed settings by point, such as the position information, operation pattern, speed, acceleration, and deceleration settings, and robot parameter
settings can be set, edited, and backed up. Additionally, the basic operation of the robot, such as JOG movement or inching operation can also be
controlled through the TS-Manager.
Only clicking relevant icon will
show the operation panel or I/O
monitor.
Operation panel for servo status,
brake ON/OFF, and stop.
JOG movement, inching
operation, and current position
acquisition buttons.
Turns ON or OFF the operation
point monitoring.
Shows the data in easy-to-read
tabular format.
Exchanging data with a
spreadsheet application, such
as Excel is also easy.
Shows the servo or emergency
stop status, and operation mode.
Shows the current position at
real-time.
2 Four Channel Oscilloscope (Real-time trace)
This function traces the current position, speed, load factor, current
value, and voltage value at real-time. Additionally, as trigger conditions
are set, data can be automatically obtained when these conditions are
satised. Furthermore, as a zone is specied from the monitor results,
the maximum value, minimum value, and average value can be calcu-
lated. These values are useful for the analysis if a trouble occurs.
Real-time traceable items (up to four items)
• Voltage value • Current value • Motor load factor
• Command speed • Current speed • Internal temperature
•
Command current value
•
Present current value
•
Input/output I/O status
• Word input/output status
Specify a zone
for calculation.
Calculates the
maximum value,
minimum value,
average value,
and root mean
square value in
a specified zone.
Traces data at real-time.
3
Various monitor functions and detailed error logs
The robot operation status (operation mode or servo status) and I/O sta-
tus can be monitored.
Additionally, the Alarm Log screen also displays the input/output I/O
status in addition to the carrier position, speed, operation status, current
value, and voltage value in case of an alarm. This greatly contributes to
the status analysis.
I/O status monitor panel Detailed status monitor panel
4 Operation simulation
As the operation condition data or point data is input, a period of time
necessary for operation is simulated.
Use of this function makes it possible to select an optimal model before
purchase and simulate the speed and acceleration/deceleration settings
without use of actual machine.
It is also possible to link this operation simulation function with the TS-
Manager main software. This easily affects the point data you have ed-
ited in the actual machine.
Point data list
Result display list
Displays the detailed simulation
results graphically.
Operation setting list
Note. Excel is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Transervo Catalog- 17
www.yamaharobotics.com
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals