Yamaha RX-V3900 Owner's Manual Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 323
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
80 En
Graphical user interface (GUI) menu
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
y
To customize the program parameter settings, press
0SUBMENU to turn on the submenu after you select the
desired program.
Basic configuration of sound field
programs
Each sound field program has some parameters defining
the characteristics of the program. To customize the
selected sound field program, adjust “DSP Level” and/or
“Dialogue Lift” first, and then try other parameters.
Adjusting the effect sound level of the sound
field programs (DSP Level)
Sound field programs add effect sounds (DSP effect
sounds) to the original source sound to create sound field
in the listening room. Use the “DSP Level” parameter to
adjust the level of the effect sounds.
Adjust “DSP Level” as follows:
Increase the value of “DSP Level” when
the effect sound of the selected sound field
program is too weak.
you cannot recognize any difference between the
sound field programs.
Decrease the value of “DSP Level” when
the sound is vague.
you feel that the additional sound effect is
excessive.
Control range: –6 dB to +3 dB
Adjusting the vertical dialogue position
(Dialogue Lift)
Use this feature to adjust the vertical position of the
dialogues in movies. The ideal position of the dialogues is
at the center of the video monitor screen.
If the dialogues are heard at the lower position of the video
monitor screen, increase the value of “Dialogue Lift”.
Choices: 0, 1, 2, 3, 4, 5
“0” (initial setting) is the lowest position, and “5” is the
highest position.
“Dialogue Lift” is available when “Front Presence” is set to
“Yes” (page 88) and headphones are not connected.
You cannot move the dialogue position down from the initial
dialogue position.
Stereo/Surround
The DSP effect
sound level is low
The DSP effect sound
level is high
Notes
The ideal
dialogue
position
Move up to the ideal dialogue position
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 322 323

Comments to this Manuals

No comments