Yamaha RX-V3900 Owner's Manual download pdf (Page 51)

47 En

BASIC

OPERATION

English

Use the PURE DIRECT mode to enjoy the pure fidelity

sound of the selected source. When the PURE DIRECT

mode is activated, this unit plays back the selected source

with the least circuitry.

Press LPURE DIRECT (or

PURE DIRECT)

to turn on or off the PURE DIRECT mode.

The

PURE DIRECT button on the front panel lights up

and the front panel display automatically turns off while

this unit is in the PURE DIRECT mode.

• The following operations are not possible when this unit is in

the PURE DIRECT mode:

– switching the sound field program

– displaying the GUI menu

• The PURE DIRECT mode is automatically canceled whenever

this unit is turned off.

To make this unit output video signals during the PURE

DIRECT mode, configure the “Pure Direct” setting (page 93).

Use this feature to adjust the balance of bass and treble for

the front L/R and center speaker channels and the

subwoofer channel.

1 Press

TONE CONTROL on the front

panel repeatedly to select the high-frequency

response (TREBLE) or the low-frequency

response (BASS).

2 Rotate the

PROGRAM selector to adjust

the high-frequency response (TREBLE) or

the low-frequency response (BASS).

Control range: –6.0 dB to +6.0 dB

• If you increase or decrease the high-frequency or the

low-frequency sound to an extreme level, the tonal quality of

the surround speakers may not match that of the front L/R and

center speakers and the subwoofer.

• TONE CONTROL is not effective when the PURE DIRECT

mode is activated, or when “MULTI CH“ is selected as the input

source.

You can adjust the output level of each speaker while

listening to a music source. This is also possible when

playing sources input at the MULTI CH INPUT jacks.

This operation will override the level adjustments made in the

automatic setup (page 30) and “Level” (page 89).

1 Press

LEVEL and then 9k / n repeatedly

to select the speaker you want to adjust.

The available speaker channels differ depending on the speaker settings.

2 Press 9l / h on the remote control to

adjust the speaker output level.

Control range: –10.0 dB to +10.0 dB

Use this feature to select a source component from which

you want to record.

1 Press and hold

REC OUT until “REC

OUT” appears in the front panel display.

2 Rotate

PROGRAM to select the source

component.

To record the input source currently selected, select “SOURCE”.

Using audio features

Before performing the following operation, set the operation

mode selector on the remote control to

AMP.

Enjoying pure hi-fi sound

Notes

Adjusting the tonal quality

Notes

Before performing the following operation, set the operation

mode selector on the remote control to

AMP.

Adjusting the speaker level

Note

Display Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR.L

Surround left speaker

SUR.R

Surround right speaker

SB L

Surround back left speaker

SB R

Surround back right speaker

FP L

Presence left speaker

FP R

Presence right speaker

SWFR

Subwoofer

Selecting the recording source

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 322 323

Comments to this Manuals

No comments

Yamaha RX-V3900 Owner's Manual Page 51

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V3900