Yamaha RX-V3900 Owner's Manual download pdf (Page 98)

94 En

Graphical user interface (GUI) menu

■ HDMI ` HDMI (HDMI-to-HDMI video

signal processing)

Use this feature to select whether this unit processes the

HDMI-to-HDMI video signals (input at HDMI input jacks

and output at HDMI OUT jacks).

■ Processing

(HDMI video signal processing)

Use this feature to configure the resolution, aspect, and

progressive re-processing settings for the video signals

output at the HDMI OUT jacks.

This feature is available only when “Analog ` HDMI” or

“HDMI ` HDMI” is set to “Processing”.

Resolution (HDMI video signal resolution)

Use this feature to enable or disable the upscaling of the

analog-to-HDMI video signals and/or HDMI-to-HDMI

video signals.

This unit up-scales the video signals as follows:

• 480i(576i) → 480p(576p)/720p/1080i/1080p

• 480p(576p) → 720p/1080i/1080p

• 720p → 1080i/1080p

• 1080i → 720p/1080p

Aspect (HDMI aspect ratio)

Use this feature to select whether this unit converts the

aspect ratio of the analog-to-HDMI video signals and/or

HDMI-to-HDMI video signals.

• If the aspect ratio of the input video source is other than 4:3, this

unit automatically ignores the setting of “Aspect”.

• When “Aspect” is set to “Smart Zoom”, the video images of the

edge of the video monitor are rather stretched.

Prog. Re-Processing (Progressive re-processing)

Use this feature to enable or disable the progressive re-

processing of the analog-to-HDMI video signals and/or

HDMI-to-HDMI video signals.

This setting is effective only for video signals of which

resolution is 480p(576p), 720p, or 1080p.

Use this feature to set the HDMI functions or check the

information about the video monitors connected to the

HDMI OUT jacks.

■ Standby Through (Standby through)

Mode (Standby through mode)

Use this feature whether this unit allows the HDMI signals

input at the HDMI IN jacks to pass thorough this unit

when this unit is in the standby mode. You can also

designate an HDMI IN jack and HDMI OUT jack(s) that

accept the signals when “Mode” is set to “Fix” and this

unit is in the standby mode.

When “Mode” is set to “Last” or “Fix”, the amount of power

consumption in the standby mode increases.

Choice Functions

Through

Select this setting when you do not want this

unit to process the HDMI-to-HDMI video

signals.

Processing

Select this setting when you want this unit to

apply the video processing configured in

“Processing” to the HDMI-to-HDMI video

signals.

Note

Choice Functions

Through

Does not up-scale any video signals.

480p (or

576p), 1080i,

720p, 1080p

Up-scales video signals to 480p or 576p, 1080i,

720p, or 1080p of resolution.

Choice Functions

Through

Does not make any adjustments to the aspect

ratio for the HDMI video signal sources.

16:9 Normal

Displays video images with the aspect ratio of

4:3 on your video monitor with the aspect ratio

of 16:9. Black stripes appear on the right and

left sides as a result.

Smart Zoom Fits video images with the aspect ratio of 4:3

to your video monitor with the aspect ratio of

16:9.

Notes

Choice Functions

Off

Disables the progressive re-processing of the

HDMI video signals.

Enables the progressive re-processing of the

HDMI video signals.

Note

Setup (HDMI)

Choice Functions

Off

Disables the HDMI standby through feature.

HDMI signals do not pass through this unit if

this unit is in the standby mode.

Last

HDMI signals pass through this unit (only from

the HDMI IN jack to the HDMI OUT jack(s)

used when this unit is set to the standby mode)

even when this unit is in the standby mode.

Fix

HDMI signals pass through this unit (from the

HDMI IN jack specified in “Input” to the HDMI

OUT jack(s) specified in “Output”) even when

this unit is in the standby mode.

Note

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 322 323

Comments to this Manuals

No comments

Yamaha RX-V3900 Owner's Manual Page 98

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V3900