90OWNER’S MANUALMODE D’EMPLOIHTR-5240Natural Sound AV ReceiverAmpli-tuner audio-vidéoU C A1/17/0, 3:57 PM
6Display6 g and o indicators“ g ” lights up when the built-in Dolby Digitaldecoder is on and the signals of the selected source encodedwith Dolby Digi
7EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONRemote Control1 IndicatorThis flashes in red when pressing a button on the r
8SPEAKER SETUPSpeaker PlacementRefer to the following diagram when you place thespeakers.Speakers to Be UsedThis unit is designed to provide the best
9EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATIONCONNECTIONSBefore Connecting ComponentsCAUTIONNever connect this unit and oth
10Connecting the AntennasBoth AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signalstreng
11EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATION AM loop antenna (included)The AM loop antenna can be removed from the stan
12Connecting an Audio Component PHONO terminalsThese terminals are used to connect a turntable with an MMor high-output MC cartridge. If you have a t
13EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATIONConnecting a Video Component Audio signal terminalsBe sure to connect the r
14 S VIDEO terminalsIf your VCR, TV monitor or DVD/LD player has “S” (high-resolution) video terminals, they can be connected to thisunit’s S VIDEO t
15EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATIONConnecting SpeakersBe sure to connect the right channel (R), left channel (L
CAUTIONSAFETY INSTRUCTIONS8 Ventilation – The unit should be situated so that itslocation or position does not interfere with its properventilation.
16 Speaker cables1 Remove approx. 10 mm (3/8”) of insulationfrom each of the speaker cable.2 Twist the exposed wires of the cable togetherto prevent
17EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATIONIMPEDANCE SELECTOR SwitchWARNINGDo not change the IMPEDANCE SELECTOR switch
18Using the Test ToneThe adjustment of each speaker sound output level shouldbe performed at your listening position with the remotecontrol. After com
19EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTIONPREPARATION4 Adjust BALANCE on thefront panel so that thesound output level of theright
20When using the remote control, press AMP(TUNER) onthe component selector.1 Set VOLUME to the “m”position.2 Turn the power on.3 Press SPEAKERS A or B
21EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION5 Play the source.Refer to the instructions for the source component (andpa
22Input Mode (for the DVD/LD and TV/digital TV and satellite tunersources)This unit allows you to switch the input mode for sourcesthat send both digi
23EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION Notes on playing a sourceencoded with DTS• If “DATA ERROR” appears on the
243 Press PRG+ or PRG–repeatedly to select thedesired program.The name of the selectedprogram appears on the display.yIf desired, adjust the delay tim
25EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION[4] PRO LOGIC/ENHANCED( ox)• Input source: Dolby Surround2-ch Dolby Digital
CAUTIONEnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION19 For US customers only:Outdoor Antenna Grounding – If an outside ant
26No. PROGRAM SUBPROGRAM FEATURES2 MOVIETHEATER 13 MOVIETHEATER 2[1] 70 mm SPECTACLE( ox)• Input source: Dolby Surround2-ch Dolby Digital• Output chan
27EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONNo. PROGRAM FEATURES4 MONO MOVIE• Input source: Monaural• Output channel: 1
285 Press PRESET/TUNING h once to tune in to ahigher frequency and l once to tune in to alower frequency.Press the button again if the tuning search d
29EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONAutomatic Preset Tuning (for FMstations only)You can make use of the automa
30TUNINGTo Recall a Preset StationYou can recall any desired station simply by selecting thepreset station number with which it was stored.You can als
31EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONLR–+–+2,4Exchanging Preset StationsYou can exchange the assignment of two p
32RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTELR–+–+1,42Recording adjustments and other operations are performedfrom the tape deck, MD recorder or
33EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONSET MENU132This unit provides you with the following items in the SETMENU t
34Description of Each Item1. CENTER SPChoices: LRG (Large)/SML (Small)/NONEPreset position: LRG (Large)LRG (Large)Select this position if your center
35EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION7. D-RANGE (Adjusting the dynamicrange)Choices: MAX/STD (Standard)/MINPrese
CAUTIONCAUTION: READ THIS BEFORE OPERATING YOUR UNIT.1. To assure the finest performance, please read thismanual carefully. Keep it in a safe place fo
368. DTS LFE (Adjusting the outputlevel of the LFE channel for DTS)Control range: –10 dB to +10 dB (in 1 dB steps)Preset value: 0 dBNote• This adjustm
37EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION1. PRO LOGIC/Normal 15 to 30 20DOLBY DIGITAL/Normal 0 to 15 5DTS DIGITAL SU
38Adjusting MethodAdjustments should be performed with the remote controlwhile watching the information on the display.1 Press AMP(TUNER) on thecompon
39EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONSLEEP TIMERCanceling the Selected SLEEPTimerPress SLEEP repeatedly until “S
40 Example: To control YAMAHA CDplayer1 Make sure that VOLUME is set to the “m”position.2 Press AMP(TUNER) on thecomponent selector.3 Turn on the pow
41EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONDescription of Each Mode TAPE/MD MODENote• TV VOLUME functions if you have
42 CD MODENote• TV VOLUME and TV INPUT function if you have set the code for your TV.e PAUSEThis button gives a pause in operation. The buttonfunctio
43EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION DVD/LD MODENote• TV VOLUME and TV INPUT function if you have set the code
44 VCR MODENote• TV VOLUME, TV INPUT and TV SLEEP function if you haveset the code for your TV. CBL/SAT MODENote• TV VOLUME, TV INPUT and TV SLEEP f
45EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONAdvanced Information Setup codesYou can set the code for the manufacturer
EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION1FEATURES5-Channel Power Amplification◆ Minimum RMS Output(0.06% THD, 20 Hz –
46 Returning to the factory-set codesTo return all components to the factory-set codes, followthese steps.1 Press one of thecomponent selectorbuttons
47EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONTROUBLESHOOTINGIf the unit fails to operate normally, check the following p
48SYMPTOM CAUSE REMEDYIncorrect cable connections. Firmly connect the audio plugs. If the problempersists, the cables may be defective.No connection f
49EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATION Remote controlThis unit is in the standby mode. Turn on the power of the
50SPECIFICATIONSAUDIO SECTION• Minimum RMS Output Power20 Hz to 20 kHz, 0.06% THD, 8 ohms Main L/R, Center, Rear L/R ...
51EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONCINEMA DSPGLOSSARY Dolby SurroundDolby Surround uses four discrete channel
52INDEXAAccessories ... 2AC outlet ...
iTVA-Mark 1161A Tandy 0941Abex 1151Admira 1141Adventura 1131Aiko 1121Akai 0331, 1101, 1111Alba 0431Alleron 1091Ambassador 1081Amstrad 0481, 1081Anam 0
iiSimpson 0581, 0961Solavox 1151Sonoko 1001Sontec 1001Sony 0371, 0451, 0661,0841, 0951, 1281,1441Soundesign 0861, 0961, 1051,1091Soundwave 1001Spectri
iiiRCA 0112, 0382, 0392,0482, 0592, 0602,0662, 0822, 0942Realistic 0402, 0472, 0612,0682, 0842, 0902,0912, 0922, 0932,0992Ricoh 0352, 0362Saisho 0212,
2GETTING STARTEDChecking the Package ContentsCheck that the following items are included in your package.213Remote control Batteries (AAA, R03, UM-4 t
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,
DISPLAY (MD)SLEEPEFFECTMUTETV VOLUMEVOLUMEPOWERREC/PAUSEPLAYDIR A (TAPE)SKIP– (MD)REWIND (TAPE)SEARCH (MD)Input selector buttonsPAUSE (MD)DECK A/B (TA
DISPLAYTV SLEEPEFFECTCHANNEL ENTERMUTETV VOLUMEVOLUMEVCR POWERVCR RECPress this button twice to start recording.Appuyer deux fois sur cette touche pou
3EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONUsing the Remote ControlThe remote control transmits a directional infrared
4LR–+–+12 3 4 657890qwertyu i op6 VOLUMETurn this control to turn up or down the volume.7 PHONES jackConnect the headphones to the PHONES jack. You ca
5EnglishBASIC OPERATIONADVANCED OPERATION APPENDIXINTRODUCTION PREPARATIONq Tone controlsThese controls are only effective for the sound from themain
Comments to this Manuals