CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
En 45
■
Reviewing automatic setup
parameters
The results of automatic acoustics measurement can be
reviewed once measurement is complete.
1
Press iCursor B / C repeatedly to select
“Result” and press iENTER immediately
after the automatic measurement.
The results of acoustics measurement are displayed.
a
List of menu items
Menu items available in the Result menu are displayed.
b Number of measurement
Indicates the number of measurements for multiple
listening positions.
c Diagram
Shows the speaker setup and sound adjustment as diagram.
2
Select the desired menu item (or enable a
function) using iCursor B / C / D / E and
iENTER.
3
Press iRETURN to finish the Result menu.
■
Reloading automatic setup
parameters
If you are not satisfied with the fine-adjustment of setup
parameters with Manual Setup, the result of automatic
setup saved on this unit can be reloaded. Select “Setup
Reload” in the Result menu.
RETURN
ENTER
R
E
ECEIVE
DI
-A
B
LTI
ET
H
N
D
K
B
A
i
The Result menu can be viewed only when the
automatic measurement is performed.
a
b
c
Wiring Displays the speakers connected to this
unit and the polarity of each connected
speaker.
• “Normal” is displayed when the
polarity of the connected speaker is
normal.
• “Reverse” is displayed when the
polarity of the connected speaker is
opposite.
Size Displays the size of the connected
speakers and the bass cross over
frequency (“Bass Crossover”).
• “Large” is displayed when the
connected speaker has the ability to
reproduce the low-frequency signals
effectively.
• “Small” is displayed when the
connected speaker does not have the
ability to reproduce the low-frequency
signals effectively.
Distance Displays the distance from the listening
position to speakers. The unit for distance
can be switched between “ft” (feet) and
“m” (meter) by pressing
iCursor D / E (☞p. 96).
Level Displays the result of the adjustment of
each connected speaker output level.
Setup Reload J1 Clears the fine-adjustment with Manual
Setup and reloads the result of automatic
setup. For details, refer to “Reloading
automatic setup parameters.”
The result of automatic setup can be fine-tuned
manually by “Manual Setup.” Refer to “Manual
speaker setup” (☞
p. 93) for details.
NOTE
When automatic setup parameters are reloaded,
manually configured settings are cleared. To avoid
clearing manually configured settings by reloading
automatic setup parameters, see “Prohibiting setting
changes” (☞
p. 108).
J
1 : This item is displayed after the fine-adjustment is performed with
“Manual Setup.” Use this item to return the settings to the result
of automatic setup.
Comments to this Manuals