Yamaha RX-A2000 Owner's Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 159
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
SETUP
Setting various functions (Setup menu)
En 98
Auto-adjusting Dolby Digital and DTS
dynamic range
Dynamic Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Setting the maximum volume
Max Volume
Specify the maximum volume level so that sound is not too loud.
The default setting of +16.5 dB produces the highest volume.
Setting the startup volume
Initial Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
Video signal output in Pure Direct Mode
Pure Direct Mode
Selects whether or not this unit outputs video signal in Pure Direct
Mode.
Adjusting DSP effect and volume level
Adaptive DSP Level
Automatically adjust the level of DSP effect in conjunction with
the volume level.
MAX (Default) Produces audio without adjusting the dynamic range.
STD Adjusts the dynamic range for optimum volume for
regular home use.
MIN/AUTO (MIN) Sets the dynamic range suitable for low
volume or a quiet environment, such as at night, for
bitstream signals except for Dolby TrueHD signals.
(AUTO) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal information.
Adjustable range -30.0 dB to +16.5 dB (maximum volume)
Default setting +16.5 dB
Adjustment
increments
5.0 dB
Adjustable range Off, Mute, -80.0 dB to +16.5 dB
Default setting Off
Adjustment
increments
0.5 dB
Auto (Default) Automatically output video signal when the input
source equipping video signal input jacks or content
window is selected. If no video signal is input, only
the wall paper is displayed.
Video Off Does not output video signal including the wall paper.
Off Disables automatic adjustment of the level of DSP
effect.
On (Default) Adjusts the degree of DSP effect in conjunction with
volume level. The higher the volume level, the less the
DSP effect applied. The lower the volume level, the
greater the DSP effect applied.
This feature also corrects sound effect according to
the result of automatic measurement.
J
1 : When you set “Max Volume” at a lower level than “Initial Volume,” “Max
Volume” has priority.
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 158 159

Comments to this Manuals

No comments