Yamaha RX-A2000 Owner's Manual download pdf (Page 95)

SETUP

Setting various functions (Setup menu)

En 95

Surround

Selects the size of the surround speakers.

Surround Back

Selects the size of the surround back speakers.

Front Presence

Specify connection of front presence speakers.

Subwoofer1 / Subwoofer2

Confirms the subwoofer.

SWFR Layout

Select a layout of two subwoofers connected to this unit.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

Large Select this when the surround speakers are large.

Small (Default) Select this when the surround speakers are small. The

crossover frequency can be selected from 40Hz,

60Hz, 80Hz (Default), 90Hz, 100Hz, 110Hz, 120Hz,

160Hz, or 200Hz when selecting this. All frequencies

below the selected frequency will be sent to the

subwoofer.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

• When set to “None,” no sound is produced from the surround

back speaker even if that speaker is connected.

• When set to “None,” the sound programs will change to Virtual

CINEMA DSP mode.

Largex1 Select when one large surround back speaker is

connected.

Largex2 Select when two large surround back speakers are

connected.

Smallx1 Select when one small surround back speaker is

connected.

Smallx2 (Default) Select when two small surround back speakers are

connected.

None Select this when no surround back speakers are

connected.

• When there are no surround speakers are connected, the setting

will automatically change to “None.”

• You can set surround back audio signals, including from the

playback source, to be mixed down and produced from a single

speaker (6.1-channel layout) or produced from left and right

surround speakers (5.1-channel layout).

Use (Default) Select this when front presence speakers are

connected.

None Select this when front presence speakers are not

connected.

Use (Default) Select this when subwoofer is connected. During

playback, the subwoofer will produce audio from the

LFE (low-frequency effect) channel and bass audio

from other channels. J1

Select the phase of the subwoofer from the following

items if the bass audio is lacking or unclear.

Normal (Default) Does not change the subwoofer

phase.

Reverse Reverses the subwoofer phase.

None Select this when subwoofer is not connected. The

front speakers will produce audio from the LFE (low-

frequency effect) channel and bass frequency audio

from other channels, when both “Subwoofer1” and

“Subwoofer2” are set to “None.”

Left + Right Select when two subwoofers are arranged with one to

the left and one to the right of this unit.

Front + Rear Select when two subwoofers are arranged with one in

front of and one behind this unit.

Monaural x2

(Default)

Select when two subwoofers are arranged in a manner

not suited to either or the other setting options.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

When “Subwoofer1” and “Subwoofer2” are set to “None” or

“Front” is set to “Small,” “Extra Bass” is disabled.

1 : Enabling “Extra Bass” allows both the subwoofer and the front speakers to

produce bass audio.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 158 159

Comments to this Manuals

No comments

Yamaha RX-A2000 Owner's Manual Page 95

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A2000