Yamaha RX-A2000 Owner's Manual download pdf (Page 145)

APPENDIX

Specifications

En 145

•Maximum Input Level

PHONO (1 kHz, 0.1% THD) ................................... 60 mV or more

AUDIO2 etc. (1 kHz, 0.5% THD).............................. 2.4 V or more

• Output Level/Output Impedance

AV OUT....................................................................200 mV/1.2 kΩ

HEADPHONE OUT .................................................150 mV/100 Ω

PRE OUT......................................................................1.0 V/1.2 kΩ

ZONE2 OUT ................................................................1.0 V/1.2 kΩ

ZONE3 OUT ................................................................1.0 V/1.2 kΩ

• Frequency Response

AUDIO2 etc. to FRONT L/R

(Pure Direct, 10 Hz to 100 kHz)..........................................+0/-3 dB

• Total Harmonic Distortion

PHONO to AV OUT (20 Hz to 20 kHz, 1 V).............. 0.02% or less

AV1 to FRONT L/R (20 Hz to 20 kHz, 65 W/8 Ω)..... 0.04% or less

• Signal to Noise Ratio (IHF-A Network)

PHONO (input shorted, 5 mV) to AV OUT

[U.S.A. and Canada models] ......................................86 dB or more

[Australia model]........................................................81 dB or more

AUDIO2 etc. (input shorted, 250 mV) to FRONT L/R

..................................................................................100 dB or more

• Residual Noise (IHF-A Network)

FRONT L/R................................................................150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO (input shorted)...................................60 dB/55 dB or more

AV1 etc. (input 5.1 kΩ shorted).......................60 dB/45 dB or more

• Volume Control

Main Zone ................................................... MUTE/-80 to +16.5 dB

Zone2, Zone3............................................... MUTE/-80 to +16.5 dB

• Tone Control Characteristics

Main Zone (FRONT, CENTER, SUBWOOFER)

Bass Boost/Cut........................................................... ±6 dB/50 Hz

Bass Turnover Frequency.................................................... 350 Hz

Treble Boost/Cut...................................................... ±6 dB/20 kHz

Treble Turnover Frequency................................................ 3.5 kHz

Zone2, Zone3

Bass Boost/Cut....................................................... ±10 dB/100 Hz

Bass Turnover Frequency.................................................... 350 Hz

Treble Boost/Cut.....................................................±10 dB/10 kHz

Treble Turnover Frequency ................................................3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (FRONT, CENTER, SURROUND, SURROUND BACK:

Small) ................................................................................12 dB/oct.

L.P.F. (SUBWOOFER) .....................................................24 dB/oct.

■ Video Section

• Video Format (MONITOR OUT/ZONE OUT, Wall Paper/OSD)

[U.S.A. and Canada models] ........................................NTSC/PAL

[Australia model]..........................................................PAL/NTSC

• Video Signal Type (Video Conversion) .............................NTSC/PAL

• Signal Level

Composite .....................................................................1 Vp-p/75 Ω

S-Video

- NTSC................................1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

- PAL.......................................1 Vp-p/75 Ω (Y), 0.3 Vp-p/75 Ω (C)

Component...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (P

B/PR)

• Maximum Input Level (Video Conversion Off) .......1.5 Vp-p or more

• Signal to Noise Ratio (Video Conversion Off) ............. 60 dB or more

• Frequency Response (Video Conversion Off)

Component

(MONITOR OUT/ZONE OUT) ............... 5 Hz to 100 MHz, ±3 dB

■ FM Section

• Tuning Range

[U.S.A. and Canada models] ............................87.5 to 107.9 MHz

[Australia model].......................................... 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF)

Mono .....................................................................3.0 µV (20.8 dBf)

• Signal to Noise Ration (IHF)

Mono/Stereo..................................................................74 dB/70 dB

[U.S.A. model] HD ..................................................................80 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo.....................................................................0.3%/0.3%

[U.S.A. model] HD ................................................................. 0.03%

• Antenna Input ........................................................ 75 Ω (unbalanced)

■ AM Section

• Tuning Range

[U.S.A. and Canada models]................................530 to 1710 kHz

[Australia model] .................................................531 to 1611 kHz

■ General

• Power Supply

[U.S.A. and Canada models]............................... AC 120 V, 60 Hz

[Australia model] ................................................ AC 240 V, 50 Hz

• Power Consumption

[U.S.A. model]........................................................490 W/620 VA

[Canada model] .......................................................400 W/510 VA

[Australia model] .................................................................490 W

• Standby Power Consumption

HDMI Control Off/Standby Through Off.....................0.3 W or less

HDMI Control On/Standby Through On.................. 2.7 W (typical)

NET Standby On....................................................... 4.5 W (typical)

• Dimensions (W x H x D)

............................... 435 x 182 x 430 mm (17-1/8 x 7-1/8 x 16-7/8 in)

• Weight..................................................................... 16.0 kg (35.3 lbs.)

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 158 159

Comments to this Manuals

No comments

Yamaha RX-A2000 Owner's Manual Page 145

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A2000