Yamaha V3 Owner's Manual download pdf (Page 504)

100

101

Appendix

DME Designer Owner’s Manual

504

Initializing the ICP1

Follow the steps below to initialize the internal

memory.

1. Turn off the power to the ICP1.

2. Plug the PA-300 AC adaptor while holding

down the [SCENE] and [ENTER] buttons.

Release keys after YAHAMA logo disappears.

The Initialization display appears.

3. Press the [F2]/[F5] keys to select a type of

initialization.

Initialize DME:

Deletes all user settings except component data. The

Utility settings will be set to default values.

Delete All Data:

Component data will be deleted. The Utility settings

will be set to default. After initialization, transfer

necessary components from DME Designer.

==> Exit Diag Mode:

Leaves this screen and restarts.

4. Press the [ENTER] key.

Do not turn off the power during initialization. Doing so

can damage the device.

When the internal memory is initialized, all data

stored in the memory will be lost. Use caution when

you execute this function.

NOTE

To cancel the initialization operation, select “==> Exit Diag

Mode” and conﬁrm the cancellation. Alternatively, simply turn

off the power to the ICP1.

CAUTION

1 2 ... 499 500 501 502 503 504 505 506 507 508 509 510

Comments to this Manuals

No comments

Yamaha V3 Owner's Manual Page 504

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha V3