Yamaha YAS-706 Owner's Manual download pdf (Page 58)

APPENDIX ➤ Troubleshooting En 58

Bluetooth

Receiving

Problem Cause Remedy

Unable to connect the unit to a Bluetooth

device.

“Bluetooth” is set to “Off”. Set it to “On” (p. 46).

Bluetooth is not selected as the input source. Select Bluetooth as the input source (p. 24).

Another Bluetooth device is connected. Terminate the current Bluetooth connection, and connect to the device from

which audio should be received (p. 24).

A Bluetooth adaptor, etc. that you want to connect to the unit has a

password other than “0000”.

Use a Bluetooth adaptor, etc. whose password is “0000” (p. 24).

The device does not support A2DP. Connect to a Bluetooth audio device that supports A2DP.

The unit and device are too far apart. Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit

and connect the device to this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals

in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

No sound is heard or the sound is

intermittent via the unit.

The device is not set to send Bluetooth audio signals to the unit. Check that the Bluetooth function of the device is set properly.

Playback on the device has not been performed. Perform playback on the device.

The device’s volume is set to minimum. Turn up the volume level on the device.

The unit and device are too far apart. Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals

in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signal.

The Bluetooth connection of the unit with the device is disconnected. Perform Bluetooth connection operations again (p. 24).

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 66 67

No comments

Yamaha YAS-706 Owner's Manual Page 58