Yamaha YAS-706 Owner's Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 67
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
NETWORKS Connecting to a network En 37
Connecting a mobile device to the unit
directly (Wireless Direct)
Connect a mobile device directly to the unit without using a wireless
router (access point).
Wireless Direct supports the following.
Operation of the unit using a mobile device to which the dedicated
MusicCast CONTROLLER app has been installed.
Use of AirPlay to play music files stored on an iOS device.
NOTE
You cannot use Wireless Direct simultaneously with the wired network connection
(p. 26) or the wireless network connection (p. 27).
When Wireless Direct is enabled, the mobile device and the unit cannot connect
to the Internet. Therefore, you cannot use any kind of Internet service such as
Internet radio.
1 Press the z key to turn on this unit.
2 Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
3 Press the SETUP key.
The setup menu is displayed on the TV screen.
4 Use the S/T keys to select “Network”, and then
press the ENTER key.
5 Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
6 Use the S/T keys to select “Wireless Direct”, and
then press the ENTER key.
7 Use the S/T keys to select “Security” and the W/X
keys to select the encryption method.
Settings
None, WPA2-PSK (AES)
In most cases, “WPA2-PSK (AES)” should be selected. If your
mobile device does not support “WPA2-PSK (AES)”, select
“None”.
NOTE
As communications are not encrypted when “None” is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
8 Use the S/T keys to select “Security Key” and
press the ENTER key.
HINT
If you select “None” in step 7, this item is not available.
Mobile device
SETUP
/
/
/
ENTER
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 66 67

Comments to this Manuals

No comments