Yamaha YAS-706 Owner's Manual Page 57
- Page / 67
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
APPENDIX ➤ Troubleshooting En 57
Audio/Video
Remote control
Problem Cause Remedy
The image is not displayed on TV screen.
The HDMI cable is not securely connected. Connect the HDMI cable properly (p. 12, 13).
Menu screen of this unit is not displayed.
4K mode is not properly configured. Select Mode 1 or Mode 2 in accordance with the 4K signal format (p. 51).
A digital or high-frequency equipment
produces noises.
The input switch of TV is not set correctly. Set the TV’s input source to this unit (p. 16).
The HDMI control function does not work
properly.
The unit may be placed close to digital equipment or high-frequency
equipment.
Move the equipment away from the unit.
“HDMI Control” is set to “Off”. Set “HDMI Control” to “On” (p. 46).
The HDMI control function is disabled on your TV. Refer to documentation supplied with your TV and check the setting.
The number of the connected HDMI devices exceeds the limit. Disconnect some of the HDMI devices.
Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are
connected to the TV or a playback device with an HDMI cable.
Connect only this unit to the TV or a playback device for use as an amplifier.
When the unit is turned off, video and/or
audio from a playback device are not output
to the TV.
“HDMI Control” is set to “Off”. Set “HDMI Control” to “On” (p. 46).
Audio delay control function is not effective
even “Audio Delay” is set to “Auto”.
The TV does not support the audio delay auto adjustment feature. Adjust timing of sound output manually from “Audio Delay” in the setup menu
(p. 45).
Problem Cause Remedy
The unit cannot be operated using the remote
control.
The unit is out of the operating range. Use the remote control within the operating range (p. 3).
The batteries are weak. Replace with new batteries (p. 3).
The remote control sensor of the unit is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The TV cannot be operated when the TV’s
remote control is pointed toward the unit’s
remote sensor.
The unit and TV are too far apart (or too close), preventing proper
operation of the unit's TV remote repeater function.
Position the unit so that it is more than 5 cm (2 in) away from the TV (p. 10).
There are obstacles between the unit and the TV (cables, etc.),
preventing proper operation of the unit's TV remote repeater function.
Remove obstacles between the unit and the TV.
The TV’s remote control does not use infrared signals. The unit’s TV remote repeater function cannot be used. Reposition the unit so
that it does not obstruct the remote control sensor on the TV, and point the
TV’s remote control at the remote control sensor on the TV to control the TV.
Signals transmitted from the TV’s remote control and the unit's TV
remote repeater interfere with each other, making it difficult for the TV
to receive signals.
- Owner’s Manual 1
- Contents 2
- Supplied items 3
- Features 4
- Frequently asked questions 5
- Part names and functions 6
- Center unit (rear panel) 7
- CONNECTOR 8
- INPUTSTATUS 8
- Installation 9
- Connecting the unit 12
- HDMI connection 13
- Coaxial connection 13
- Connecting playback devices 13
- Analog connection 14
- Connecting the power cable 14
- Turning on the unit 15
- HDMI INPUT 16
- 1 Turn the unit and TV on 17
- Operations 18
- PLAYBACK ➤ Operations En 19 19
- SURROUND 19
- SUBWOOFER (+/–) keys 20
- MUTE key 20
- VOLUME (+/–) keys 20
- NET RADIO (1–3) keys 20
- INFO key 21
- Bluetooth connection 23
- (Receiving) 24
- Networks 26
- 2 Tap “Setup” 27
- iPhone) 30
- 9 Press the ENTER key 33
- Using the WPS PIN code 36
- Mobile device 37
- Media sharing setup 39
- Playing music files 39
- Playback of Internet radio 40
- Listening to Internet radio 40
- Settings 43
- Setup menu list 44
- SETTINGS ➤ Setup menu En 45 45
- Bluetooth 46
- Information 47
- Network Connection 47
- IP Address 48
- MAC Address Filter 48
- • MAC Address 1–10 48
- Function 49
- 1 Turn off the unit 51
- 1 Press the SETUP key 52
- 4 Press the ENTER key 52
- Initializing the unit 53
- Troubleshooting 54
- Audio/Video 57
- Remote control 57
- Transmitting 59
- SUBWOOFER 62
- Specifications 63
- NS-WSW121 64
- HDMI signal 65
- Digital audio signal 65
- YH958A0/EN 67
Related products and manuals for Unknown Yamaha YAS-706
Unknown Yamaha YHT-298 User's Guide
(1 pages)
(1 pages)
Unknown Yamaha B-2x Owner's Manual
(8 pages)
(8 pages)
Unknown Yamaha NS-AP7900M Manual
(8 pages)
(8 pages)
Unknown Yamaha HTR-6260 User Manual
(1 pages)
(1 pages)
Unknown Yamaha FL512M Owner's Manual
(3 pages)
(3 pages)
Unknown Yamaha P-45 User Manual
(6 pages)
(6 pages)
Unknown Yamaha QY20 User Manual
(2 pages)
(2 pages)
Unknown Yamaha PDX-13 Manual
(2 pages)
(2 pages)
Unknown Yamaha H11 User Manual
(2 pages)
(2 pages)
Unknown Yamaha EM-150II Owner's Manual
(12 pages)
(12 pages)
Unknown Yamaha DM1000 Installation Guide
(13 pages)
(13 pages)
Unknown Yamaha DDKU-P7 Owner's Manual
(1 pages)
(1 pages)
Unknown Yamaha n8 Installation Guide
(24 pages)
(24 pages)
Unknown Yamaha CDC-697 User Manual
(2 pages)
(2 pages)
Unknown Yamaha C1 Owner's Manual
(78 pages)
(78 pages)
Unknown Yamaha YDP-C71 User's Guide
(2 pages)
Unknown Yamaha RX-V671 Setup Guide
(8 pages)
(8 pages)
Unknown Yamaha YMC-500 User Manual
(3 pages)
(3 pages)
Unknown Yamaha MY16 Manual
(8 pages)
(8 pages)
Unknown Yamaha MM10 Owner's Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 0.192 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals