Yamaha YAS-706 Owner's Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 67
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
NETWORKS Connecting to a network En 30
Using connection methods other than the
MusicCast CONTROLLER app (wireless
network)
Use the setup menu on the unit to connect to a wireless network
without using the MusicCast CONTROLLER app.
Sharing the iOS device setting (p. 30)
Using the WPS push button configuration (p. 31)
Searching for a wireless router (access point) (p. 32)
Setting up the wireless connection manually (p. 34)
Using the WPS PIN code (p. 36)
NOTE
Once the unit has been connected to a wireless network using any of the methods
described above, network settings will change when connection to a wireless
network is established with the MusicCast CONTROLLER app.
AirPlay is the only network function that can be used without the MusicCast
CONTROLLER app.
Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (such as an
iPhone).
Before proceeding, confirm that your iOS device is connected to a
wireless router (access point).
NOTE
You need iOS device with iOS 7 or later.
The connection settings on iOS devices cannot be applied to the unit to establish
a wireless connection if your wireless router (access point) uses WEP encryption.
See “Searching for a wireless router (access point)” (p. 32) to establish a
connection.
1 Press the z key to turn on this unit.
2 Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
3 Press the SETUP key.
The setup menu is displayed on the TV screen.
4 Use the S/T keys to select “Network”, and press
the ENTER key.
5 Use the S/T keys to select “Network Connection”,
and press the ENTER key.
6 Use the S/T keys to select “Wireless (Wi-Fi)”, and
press the ENTER key.
7 Use the S/T keys to select “Share Wi-Fi Settings”,
and press the ENTER key.
8 When the following screen is displayed, press the
ENTER key.
HINT
The settings to be deleted (initialized) will be displayed. If you do not want to
delete these settings, press the RETURN key to terminate the connection.
SETUP
RETURN
/
ENTER
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Comments to this Manuals

No comments