Yamaha YAS-706 Owner's Manual download pdf (Page 17)

PREPARATION ➤ Turning on the unit En 17

When the unit is turned on for the first time after purchase, the

screen shown below will be displayed on the TV and the

indicator will be flashing.

Follow the on-screen instructions to use an iOS device (iPhone,

etc.) to connect the unit to a wireless network (p. 41)).

Connecting the unit to a wireless network is simpler when the

MusicCast CONTROLLER app installed on your mobile device is

used. Press the RETURN key to cancel this screen, and then refer

to p. 27.

HINT

• This screen will not be displayed and the indicator will not be flashing if the

unit is connected to a router via its NETWORK jack (wired connection).

Selecting a language for menu display

1 Turn the unit and TV on.

2 Switch the TV’s input to display video input from

this unit (p. 16).

3 Press and hold the SETUP key until the “OSD

Language” menu appears on the TV.

HINT

When the menu is not displayed

• Confirm the following cases.

− The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit

are connected.

− The input of your TV is set to “HDMI 1” (example).

4 Use the S/T key to select the desired language and

press the ENTER key.

Settings

ENGLISH (default), FRANÇAIS, ESPAÑOL

5 Press the SETUP key to exit the setup menu.

Screen displayed on a TV when the unit is turned on

SETUP

RETURN





ENTER

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 66 67

No comments

Yamaha YAS-706 Owner's Manual Page 17