Yamaha SPX2000 User Manual download pdf (Page 93)

SPX2000—Manual de instrucciones 93

MIDI

■ 2.8.2.10 Parameter change (Function call : Program

clear)

When the SPX2000 receives this message, it will erase the speciﬁed effect

name, and will then use this message to transmit the state following the

change. At this time, the device number will be the MIDI channel of the

SPX2000. If the MIDI channel is OMNI, the device number will be 1.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010000 10 Function call

01100100 64 Effect Program clear func-

tion

0mmmmmmm mh number High

0mmmmmmm ml number Low

EOX 11110111 F7 End of exclusive

■ 2.8.2.11 Parameter change (Function call : Undo)

When the SPX2000 receives this message, it will perform the same opera-

tion as if the [UNDO] button had been pressed, and will then use this

message to transmit the state following the change. At this time, the

device number will be the MIDI channel of the SPX2000. If the MIDI

channel is OMNI, the device number will be 1.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010001 11 Function call

00100010 24 Undo

00000000 00

DATA 00000000 00

00000000 00

EOX 11110111 F7 End of exclusive

■ 2.8.2.12 Parameter change (Function call : Compare)

When the SPX2000 receives this message, it will perform the same opera-

tion as if the [COMPARE] button had been pressed, and will then use this

message to transmit the state following the change. At this time, the

device number will be the MIDI channel of the SPX2000. If the MIDI

channel is OMNI, the device number will be 1.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010001 11 Function call

01000100 44 Compare

00000000 00

DATA 00000000 00

00000000 00

EOX 11110111 F7 End of exclusive

■ 2.8.2.13 Parameter change (Function call : Event

Effect)

When the SPX2000 receives this message while a freeze-type effect is

recalled, it will perform the same operation as if the RECORD parameter

or PLAY parameter is selected and the [▼ DEC] button pressed. The con-

tents of the function will determine whether the RECORD parameter or

the PLAY parameter is selected.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010010 12 Function call Effect Event

0000ffff 0f function

00000000 00

0ppppppp pp Release:0, Press:1

DATA 00000000 00

0eeeeeee ee Effect number (0)

EOX 11110111 F7 End of exclusive

*This will not function if the effect type is wrong.

■ 2.8.2.14 Parameter change (Function call:

attribute(Protect))

When the SPX2000 receives this message, it will switch Protect on/off for

the speciﬁed effect, and will then use this message to transmit the state

following the change. At this time, the device number will be the MIDI

channel of the SPX2000. If the MIDI channel is OMNI, the device num-

ber will be 1.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010100 14 Function call

00000100 04 attribute

0mmmmmmm mh number High

0mmmmmmm ml number Low

DATA 0ttttttt tt attribute(protect:0x0001,

normal:0x0000)

0ttttttt tt

EOX 11110111 F7 End of exclusive

■ 2.8.2.15 Parameter request (Function call:

attribute(Protect))

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0011nnnn 3n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010100 14 Function call

00000100 04 attribute

0mmmmmmm mh number High

0mmmmmmm ml number Low

EOX 11110111 F7 End of exclusive

For the function and number, refer to the table in “2.8.2.14 Parameter

change (Function call: attribute (Protect)).”

■ 2.8.2.16 Parameter change (Function call: LCD Back

Color)

When the SPX2000 receives this message, it will change the display

background color of the speciﬁed effect, and will then use this message

to transmit the state following the change. At this time, the device

number will be the MIDI channel of the SPX2000. If the MIDI channel

is OMNI, the device number will be 1.

• Format

STATUS 11110000 F0 System exclusive message

ID No. 01000011 43 Manufacture’s ID number

(YAMAHA)

SUB STATUS 0001nnnn 1n n=0-15 (Device number=Device

No-1)

GROUP ID 00011110 1E MODEL ID (signal processor)

MODEL ID 00001001 09 SPX2000

ADDRESS 00010100 14 Function call

01100100 64 LCD Back Color

0mmmmmmm mh number High

0mmmmmmm ml number Low

DATA 0ccccccc cc color(0:Green,1:Yellow,

2:Magenta,3:Cyan,4:White)

0ccccccc cc

function number

Effect Program Clear 0x64 123-221

function channel

Freeze Play button 0x00 0

Freeze Record button 0x01 0

function number

Effect Program Attribute

0x04

1-221(1-122:response

only)

1 ... 92 93 94 ... 108

Comments to this Manuals

No comments

Yamaha SPX2000 User Manual Page 93

Comments to this Manuals

Related products and manuals for Software Yamaha SPX2000