1 “mLAN Patchbay” is application software that allows mLAN plugs (virtualinput/output jacks) to be connected to or disconnected from the mLAN bus(sys
10 If you specify “Nickname,” Vender/Module will be omitted as shown below, and display willbegin with the Nickname. By right-clicking while holding
11 When you start up mLAN Patchbay, the following window will appear. Tabs By clicking the tabs, you can access the following pages. Audio: Connecti
12 Module: Switch the Module column between displayed/hidden. This is the same function as the[View] menu command [Column filter] item [Module]. Nick
13 Audio and MIDI pages Ve n d e r : Displays the manufacturer of the mLAN device. Module: Displays the model name of the mLAN device Nickname: D
14Connection dataAudio and MIDI pagesThese pages display the connection status of the mLAN plugs. “From” displays the output plugs, and“To” displays t
15Making a connectionWhen you click on the mark (Macintosh) or right-click in the “From” (or “TO”) field (Windows),the mLAN plugs available for conne
16Depending on the sorting, there may be cases as shown below in which a single “From” mLAN plug isconnected to multiple “To” mLAN plugs. Spaces (blan
17If there is a Group Master on the bus, by selecting the submenu of Group 1 of the Manual mode, asshown below, the mLAN devices lock to the Group Mas
2 7 After installing mLAN Patchbay and making the necessary connections, start up mLAN Patchbay as fol-lows. Windows98/95 environment In Windows 98/9
3 File New Create a new file. The Audio and MIDI pages will show all mLAN plugs of the current bus (system) asunconnected. The WCLK page will display
4 Edit Undo/Redo Undo returns the previously-edited item to its previous state. After Undo is executed, this commandwill change to Redo. Redo cancels
5 Disconnect All Disconnect all mLAN plugs connected to the selected mLAN plug. This cannot be used in the WCLKpage. Disconnect Field All Disconnect
6 Option Update Show the mLAN devices currently on the bus and their settings on the appropriate pages. Apply Apply the state specified in all pages t
7 Preference (Windows only) Open the Preference dialog box. In the Preference dialog box you can make settings for Shortcuts, Colorand Other. Prefere
8 [Other]Serial port: Select the COM port that is used to connect the computer and mLAN device. If there is a problem such as failure to read data,
9 The lower line will skip the module name and extend from the nickname to the plug name.If you specify “Nickname,” Vender/Module will be omitted as
Comments to this Manuals