Yamaha SU700 Owner's Manual download pdf (Page 291)

Chapter 10 Jobs 291

CHAPTER 10

This job saves the selected sample as an AIFF file into floppy disk. Once you have ex-

ported the sample, you can move it to any of the many machines that recognize this

format.

●

The SU700 can export to a single floppy disk only. It cannot export onto multiple

floppy disks or onto SCSI disks.

Procedure

Insert a floppy disk into the floppy-disk drive.

Press DISK | SAVE to enter this job.

Turn the dial as necessary to select EXPORT, and then press [OK].

▼ The screen displays SELECT TRACK, prompting you to select the track containing

the sample you wish to export.

Press a bank selector and track pad (as necessary) to select the track.

▼ The bank number and meter bracket move to indicate the track selection. (A double

line must appear at the center of the bracket, indicating that the track contains a

sample.)

●

If you select an empty track, the screen displays the NO SAMPLE message. If you

wish to proceed, press another bank selector and/or track pad to select a nonempty

track. If you wish to quit, press [CANCEL] as necessary to return to the main screen.

Press [OK].

●

If the sample is too large for a floppy disk, the SU700 immediately displays the mes-

sage SAMPLE TOO LARGE. Press [CANCEL] as necessary to return to the main

screen.

●

If no disk is present in the drive, the screen will display NO DISK. Insert a disk, then

press [OK] and proceed again from the top of step 5 (Or else press [CANCEL] as

necessary to move back to a previous step or quit the job.)

▼ The screen displays the sample’s internal name (a seven-character name, where the

first three characters give the song number, the next two characters give the track

type, and the final two characters indicate the track number). The first character of

the name is flashing, indicating that you are now free to edit the name to be used for

the AIFF file.

1 ... 290 291 292 ... 354

No comments

Yamaha SU700 Owner's Manual Page 291