Chapter 7 Effects
190 Chapter 7 Effects
7.5 Insertion Effects
Insertion effects are subject to restrictions that do not apply to system effects. The
following conditions apply to insertion effects.
(a) When setting up the effect, you decide which tracks you want to connect to that
effect. For each track (other than the MASTER track) you can set the connection
either ON or OFF.
(b) You cannot connect a track to more than a single insertion-effect block. If you
place insertion effects into blocks 1, 2, and 3, for example, then for each track
(other than the MASTER track) you can connect to (a) block 1 only, (b) block 2
only, (c) block 3 only, or (d) none of the blocks.
(c) You cannot control effect levels separately for each track. Instead, you use the
knob on the MASTER track to control the overall level through the effect block.
The MASTER knob, in other words, simultaneously controls the effect level for
all tracks that you have connected to the block.
The following shows the function screen produced by pressing the [EFFECT 1] func-
tion button, where the function assigned to block 1 is CHORUS (an insertion effect).
Note that only the MASTER-track knob can be used to adjust the level; all other
knobs are disabled.
Comments to this Manuals