Yamaha SU700 Owner's Manual download pdf (Page 286)

Chapter 10 Jobs

286 Chapter 10 Jobs

Press [OK].

▼ The screen displays DRIVE=

drive_name

Turn the dial as necessary to select the disk (partition) you wish to import from.

●

To import from floppy disk, select DRIVE=FDD. (This selection is forced if you have

not mounted a SCSI drive.)

●

To import from a SCSI disk, select DRIVE=SCSI (if the disk is unpartitioned) or

DRIVE=SCSI P

(where

is the partition number).

After selecting the drive, press [OK].

▼ The screen shows the volume name of most recently selected volume on the se-

lected drive: VOLUME=

volume name

. (If you are importing from floppy disk, then

the name is always FD VOLUM.)

●

If you have selected FDD or a removable-disk SCSI device and no disk is present,

the screen will display NO DISK. If you have selected a disk that does not contain

any volumes, the screen will display VOLUME=(NONE). If you are using a foreign

disk with an unsupported format, the screen displays UNKNOWN FORMAT. In any

of these cases, press [CANCEL] as necessary to return to a previous step or to escape

from the job.

If you are importing from a SCSI drive, turn the dial as necessary to select the volume

containing the sample that you want. (Remember that floppy disks hold a single vol-

ume only; if you are importing from floppy disk, therefore, you will not be able to

change the selection).

▼ The screen displays SAMPLE=

sample_name

, where

sample_name

is the name of

one of the samples in the selected volume.

●

If the volume on disk contains no samples, the screen displays NO SAMPLES. Press

[CANCEL] as necessary to return to a previous step or to escape from the job.

Turn the dial as necessary to select the sample that you wish to import, by its

filename.

1 ... 285 286 287 ... 354

No comments

Yamaha SU700 Owner's Manual Page 286