Yamaha YZF-R6L User Manual download pdf (Page 18)

–10–

E Fasten the wireharness pickup coil lead handlebar

switch lead (left and right) main switch lead TPS

lead with a band.

F To the carburetor.

G Insert the projection of the band to the hole of the

frame and fasten the wireharness, neutral switch

lead handlebar switch leads (left and right), main

switch lead, TPS lead, rear brake switch lead and

pickup coil lead with them.

H Neutral switch lead can be put either over or under

the wireharness and starter motor.

I Route the starter motor lead under the wireharness

and battery negative (–) lead.

J Fasten the starter motor lead to the rear fender with

a band.

K Fasten the battery positive (+) lead and starter mo-

tor lead with a band.

CABLE ROUTING

SPEC

L Position the rear turn signal light connectors (left

and right) and taillight connector between the rear

fender and taillight bracket.

M Install the seatlock cable to the frame bracket with

protector side.

N Fasten the lead through under the wireharness and

oil relay lead.

O Fasten the alarm leads wireharness oil relay lead

and ground lead with a band.

P Fasten the starter relay lead and battery negative

(–) lead to the wireharness with a band. Don’t put

the upper end of the band between the seat rail and

the seat bottom.

Q From the engine.

R To the fuel filter.

S Fasten the battery negative (–) lead and wirehar-

ness with a band.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Yamaha YZF-R6L User Manual Page 18