Yamaha TDM850 Owner's Manual download pdf (Page 55)

PERIODIC MAINTENANCE AND MINOR REPAIR

6-10

3. Remove the engine oil tank cap

and drain bolts to drain the oil from

the crankcase.

NOTE:

Skip steps 4–6 if the oil filter element is

not being replaced.

4. Remove the oil filter element cover

by removing the bolts.

5. Remove and replace the oil filter

element and O-rings.

6. Install the oil filter element cover

by installing the bolts, then tighten-

ing them to the specified torque.

NOTE:

Make sure that the O-rings are properly

seated.

7. Install the engine oil drain bolts,

and then tighten them to the spec-

ified torques.

1. Engine oil drain bolt A 1. Engine oil drain bolt B

2. Oil filter element cover

3. Bolt (× 5)

1. Oil filter element

2. O-ring (× 2)

Tightening torque:

Oil filter element cover bolt:

10 Nm (1.0 m·kg)

E_4tx.book Page 10 Wednesday, October 4, 2000 4:28 PM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 109 110

No comments

Yamaha TDM850 Owner's Manual Page 55