Yamaha SR125 Service Manual download pdf (Page 191)

6-41

STEERING

CHAS

WARNING

***************************************

NOTE:

CAUTION:

YP704010

STEERING REMOVAL

 Securely support the motorcycle so that

there is no danger of it falling over.

 Stand the motorcycle on a level surface.

1. Remove:

 Ring nut

Use a exhaust and steering nut wrench

Exhaust and steering out wrench:

90890-01268

Securely support the steering shaft so that

there is no danger of it falling down.

STEERING INSPECTION

1. Wash the bearing and ball races with a sol-

vent.

2. Inspect:

 Bearings

 Ball races

Pitting/Damage  Replace.

Bearing race replacement steps:

 Remove the ball races on the head pipe using

long rod 1 and the hammer as shown.

 Remove the ball race on the under bracket us-

ing the floor chisel 2 and the hammer as

shown.

 Install the new dust seat and races.

 Always replace bearings and races as a set.

 Replace the dust seal whenever a steering

head disassembled.

If the bearing race is not fitted squarely, the

head pipe could be damaged.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 242 243

Ruchira 26 Jul 2025 | 07:58:41

Supper

Yamaha SR125 Service Manual Page 191