
6-26
REAR WHEEL, REAR BRAKE AND DRIVE CHAIN
CHAS
NOTE:
5. Inspect:
Cam shaft face
T701020
DRIVE CHAIN INSPECTION
1. Inspect:
Drive chain stiffness
Stiffness Clean and lubricate or replace.
2. Inspect:
Drive chain
1
Driven sprocket
2
More than 1/2 tooth a wear Replace the
drive chain.
Use new driven sprocket.
3. Measure:
10 link length
a
(drive chain)
Out of specification Replace the drive
chain.
10 link length limit:
122 mm
Tighten the drive chain with a finger before
measuring.
10 link length is the distance between the
inside edge of roller
1
and
11
as shown.
10 link length measurement should be done at
two or three different places.
Supper