
TRAINING WHEEL MOUNTING
INSTRUCTIONS
Part # Qty.
Description
CUSTOMER MUST RECEIVE A COPY
OF THIS INSTRUCTION SHEET AT
THE TIME OF SALE
Inst2201/02N 11/1/13
P/N: 9501-0126
Suzuki JR50
All images used are copyrighted property of CMP and may not be used without permission.
2202-70
PC514
HDW1041
HDW1062
HDW2300
HDW9006
1
2
2
2
2
2
Training Wheel Rod
Wheels
8mm Nylock Nuts
8mm x 60mm Hex Bolts
1/8" x 1-1/2" Cotter Pins
5/8” Fender Washers
1. Place washer on training wheel rod and install cotter pin for wheel assembly as per illustration.
2. Remove stock pin from foot peg, being careful not to remove peg spring when pulling out pin.
3. Place training wheel assembly to foot peg per illustration and insert bolt provided.
4. Repeat on other side.
NOTE: Check the operation of the rear brake before riding the bike. If out of adjustment the rear brake lever may contact the
training wheel shaft before engaging the brake. Adjust as neccessary until the brake works properly.
.
Note: Make sure the valve stem on the tire is facing toward the machine.
P/N: 9501-00129
Yamaha PW50
Kawasaki KDX50
FOR QUESTIONS REGARDING YOUR ORDER OR RETURNS CONTACT THE COMPANY YOU PURCHASED FROM.
FOR TECHNICAL OR INSTALLATION QUESTIONS PLEASE CALL: 763-689-4800
Comments to this Manuals