Yamaha TZ125M1 Service Manual download pdf (Page 121)

CLUTCH

4-33

6. Bend the lock washer 1 tab.

7. Install:

• Friction plate

{yellow [d=ø95 mm (3.7 in)]} 1

• Clutch plate 2

• Friction plate

{brown [d=ø100mm (3.9 in)]} 3

• Cushion spring 4

• Friction plate

{brown [d=ø95 mm (3.7 in)]} 5

NOTE:

• Install the clutch plates and friction plates

alternately on the clutch boss, starting with a

friction plate and ending with a friction plate.

• Yellow colored friction plates are used for the

first and final.

• Install the larger inner diameter friction plate

[d=ø100 mm (3.9 in)] together with the cush-

ion spring, and place them at second from the

innermost.

• If grease or oil sticks to any of the clutch

plates, friction plates and cushion spring, be

sure to clean them with solvent or replace

them.

8. Install:

• Push rod 1

• Ball 2

NOTE:

Apply the lithium soap base grease on the

push rod and ball.

ENG

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 256 257

No comments

Yamaha TZ125M1 Service Manual Page 121