Yamaha RX-A870 Owner's Manual Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 162
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
En 114
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 42
Manual Setup
Power Amp Assign Selects a speaker system. 117
Configuration
Front Selects the size of the front speakers. 117
Center Selects whether or not a center speaker is connected and its size. 117
Surround Selects whether or not surround speakers are connected and their size. 118
Surround Back Selects whether or not surround back speakers are connected and their size. 118
Front Presence Selects whether or not presence speakers are connected and their size. 118
Subwoofer Selects whether or not a subwoofer is connected and its phase. 118
Layout Selects the layouts of the surround speakers and front presence speakers. 118
Distance Sets the distance between each speaker and listening position. 119
Level Adjusts the volume of each speaker. 119
Parametric EQ Adjusts the tone with an equalizer. 119
Test Tone Enables/disables the test tone output. 120
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 120
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 120
Adjustment Adjusts the delay between video and audio output manually. 121
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 121
Max Volume Sets the limit value of the volumes. 121
Initial Volume Sets the initial volume for when this receiver is turned on. 121
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 121
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 121
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 121
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents. 122
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 122
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 123
Audio Output Selects a device to output audio. 124
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 124
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 161 162

Comments to this Manuals

No comments