Yamaha RX-V595a Owner's Manual download pdf (Page 11)

English

q INPUT MODE

This button switches between the DVD/LD and TV/DBS input

signal modes.

w VOLUME

This control is used to raise or lower the volume level.

e PHONES jack

When you use headphones, connect the headphones to the

PHONES jack. You can listen to the sound to be output from

the main speakers through the headphones.

When using headphones only, set both SPEAKERS A and B to

the OFF position and switch off the digital sound field processor

(so that no DSP program name appears on the display) by

pressing EFFECT.

r SPEAKERS

Set A or B (or both A and B) to the ON position for the main

speaker system (connected to this unit) that you want to use.

Set the button(s) for the main speaker system you don’t want to

use to the OFF position.

t A/B/C/D/E

Press this button to select one of a group (A to E) of preset

stations.

y Preset station number selector

Each of these buttons selects a preset station number (1 to 8).

u Tone controls

These controls are only effective for the sound from the main

speakers.

BASS

Use this control to increase or decrease the low-frequency

response. The “0” position produces a flat response.

TREBLE

Use this control to increase or decrease the high-frequency

response. The “0” position produces a flat response.

i BALANCE

This control is only effective for the sound from the main

speakers.

Turn the control to adjust the balance of the output volume to

the left and right speakers to compensate for sound imbalance

caused by the speaker location or listening room conditions.

o TIME/LEVEL

Press this button to select the item in the TIME/LEVEL mode.

p +/–

These buttons are used to adjust the settings of the SET MENU

mode and the TIME/LEVEL mode. In the TIME/LEVEL mode,

press + to increase the delay time or speaker output level.

Press – to decrease the delay time or speaker output level.

a SET MENU

Press this button to select functions in the SET MENU mode.

s PROGRAM selector

Press

or to select a DSP program.

The name of the selected program appears on the display.

d EFFECT

Press this button once to switch the effect speakers (center and

rear) on or off. If you turn off the effect by using EFFECT, all

Dolby Digital and DTS audio signals are directed to the main

left and right channels. In that case, the left and right channel

signal levels may not match.

f VIDEO AUX terminals

Connect an auxiliary video or audio input source such as a

camcorder to these terminals. If the connected video unit has

an S video output terminal, connect it to the S VIDEO terminal

to obtain a high-resolution picture. The source connected to

these terminals can be selected by INPUT.

01RX-V595a-e/f1 6/24/99, 11:42 AM11

1 ... 10 11 12 ... 63

Comments to this Manuals

No comments

Yamaha RX-V595a Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V595a