Yamaha HTR-4072 Owner's Manual download pdf (Page 121)

Connecting to a network wirelessly

Selecting a wireless network connection method

Select a wireless connection method according to your network environment.

Note

▪ You need to configure the network settings if your router does not support DHCP or if you want to

configure the network parameters manually. For details, see the following:

– “Setting the network parameters manually” (p.98)

▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time.

If you use MusicCast, this method is recommended. For details, see the following:

– “Adding the unit to the MusicCast network” (p.35)

Mobile device

(such as iPhone)

Internet

Modem

Wireless router

The unit

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

Press SETUP.

Use the cursor keys to select “Network” and press ENTER.

Use the cursor keys to select “Network Connection” and press

ENTER.

Use the cursor keys to select “Wireless(Wi-Fi)” and press ENTER.

The following connection methods are available.

• “Setting up a wireless connection using the WPS button” (p.122)

• “Setting up a wireless connection using an iOS device” (p.122)

• “Setting up a wireless connection by selecting from the list of available access

points” (p.

123

)

• “Setting up a wireless connection manually” (p.124)

• “Setting up a wireless connection by using the WPS PIN code” (p.125)

121

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 140 141

No comments

Yamaha HTR-4072 Owner's Manual Page 121