Yamaha HTR-4072 Owner's Manual download pdf (Page 100)

Setting the network name of the unit

Edits the network name (the unit’s name on the network) displayed on other network

devices.

Setup menu

“Network” > “Network Name”

Press ENTER to enter the name edit screen.

Use the cursor keys and ENTER key to edit the name.

Select “OK” to confirm the new name and press ENTER.

Press SETUP.

This completes the settings.

Setting the power interlock from the unit to

MusicCast compatible devices

Selects whether turning on the power of the master device of the MusicCast network

(this unit) also turns on the power of other devices of the network.

Setup menu

“Network” > “MusicCast Link Power Interlock”

Settings

Off Disables the power interlock from the unit (MusicCast master).

On Enables the power interlock from the unit (MusicCast master).

Updating the firmware via the network

Updates the firmware via the network. You can select “Perform Update” after the unit is

ready for firmware update. You can also check the firmware version and system ID.

Setup menu

“Network” > “Network Update”

Note

▪ Firmware update takes about 20 minutes or more.

▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update

may not be possible depending on the condition of the network. In this case, wait until firmware update is

ready, or update the firmware using the USB memory device. For details on using the USB memory

device, see the following:

– “Updating the firmware (UPDATE)” (p.106)

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 140 141

No comments

Yamaha HTR-4072 Owner's Manual Page 100