Yamaha PSR-520 User Manual download pdf (Page 93)

91

d’implémentation / Gráfico de implememtación

*1 PSR-520 ordinarily functions as 16 MIDI channel multi-timbral tone

generator controlled by MIDI reception data. Panel voices and the

other panel settings are not affected by the MIDI message, except-

ing the followings:

MIDI Master Tuning

System Exclusive Message for controlling Reverb, Chorus and

Dsp

The Remote Channel can be designated by the panel settings. The

designated channel on the PSR-520 can be controlled by an exter-

nal device and receive all the data excepting the following control

change data:

Data entry, MSB, LSB

Portamento control

Data increment

Data decrement

NRPN LSB, MSB

RPN LSB, MSB

*2 Bank Select MSB

The bank select MSB is used for melody voice and rhythm voice

switching.

MSB 00H: Melody voice.

MSB 7FH: Rhythm voice.

Transmission: Transmitted when changing the voice, style and

song.

Reception: All channels except10 channel receive this message.

( 10 channel is fixed at rhythm voice.). But when 10 channel is set

for the remote channel or receives XG System On message, 10

channel receives this message and the rhythm voice can change

to the melody voice.

Bank Select LSB

This message is used to correspond to the panel voice numbers

higher than 128.

Bank Select LSB=00H: program change numbers 0~127 corre-

spond to the panel voice numbers 1~128.

Bank Select LSB=01H: program change numbers 0~12 corre-

spond to the panel voice numbers 129~141.

Transmission: Transmitted when changing the voice, style and

song.

Reception: This message can be received only at the channel

designated as the remote channel or the panel voice.

No voice change will occur when only a bank select is received.

When a program change is received the latest bank select value is

used.

*3 These Control Change messages are not transmitted by the PSR-

520 panel operation, but may be transmitted by the accompani-

ment style playing.

*4 NRPN transmission/reception

The following parameters are supported.

NRPN Data entry

MSB LSB MSB LSB Parameter Name/Range Default

01H 08H mmH - - Vibrato Rate 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 09H mmH - - Vibrato Depth 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 0AH mmH - - Vibrato Delay 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 20H mmH - - Filter Cutoff Freq. 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 21H mmH - - Filter Resonance 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 63H mmH - - EG Attack Time 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 64H mmH - - EG Decay Time 40H

mm : 00H - 40H - 7FH (-64 - 0 - +63)

01H 66H mmH - - EG Release TIme 40H

mm: 00H - 40H - 7FH (-64 - 0 - +63)

14H rrH mmH - - Drum Filter Cutoff Freq. 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

15H rrH mmH - - Drum Filter Resonance 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

16H rrH mmH - - Drum EG Attack Rate 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

17H rrH mmH - - Drum EG Decay Rate 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

18H rrH mmH - - Drum Instrument Pitch Course 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

19H rrH mmH - - Drum Instrument Pitch Fine 40H

rr: drum instrument note number mm: 00H - 40H - 7FH (-64 - 0 - +63)

1AH rrH mmH - - Drum Instrument Level Depends on note

rr: drum instrument note number mm: 00H - 7FH (0 - 127)

1CH rrH mmH - - Drum Instrument Panpot Depends on note

rr: drum instrument note number mm: 00H - 40H - 7FH (L - Center - R)

1DH rrH mmH - - Drum Instrument Reverb Send Level Depends on note

rr: drum instrument note number mm: 00H - 7FH (0 - 127)

1EH rrH mmH - - Drum Instrument Chorus Send Level Depends on note

rr: drum instrument note number mm: 00H - 7FH (0 - 127)

1FH rrH mmH - - Drum Instrument DSP Send Level 7FH

rr: drum instrument note number mm : 00H - 7FH (0 - 127)

Data entry LSB is ignored.

*5 RPN transmission/reception

The following parameters are supported.

RPN Data entry

MSB LSB MSB LSB Parameter Name/Range Default

00H 00H mmH - - Pitch bend Sensitivity 02H

mm: 00H - 02H - 0CH (0 - 2 - 12)

00H 01H mmH - - Fine Tuning 40H

mm: 00H - 40H - 7FH (-64 - 0 - +63)

00H 02H mmH - - Course Tuning 40H

mm: 00H - 40H - 7FH (-64 - 0 - +63)

7FH 7FH - - - - RPN Null - -

Clears current RPN and NRPN number settings.

Data entry LSB is ignored.

*6 Not transmitted when Song and Accompaniment is playing.

*7 Pitch Bend, modulation, expression, sustain, sostenuto and

softpedal are returned to their defult values.

Clears current RPN and NRPN number settings.

Resets portament source note number.

*8 129~141 voice numbers are selectable through an appropriate

Bank Select setting (Refer to *2).

*9 When the External Clock is turned ON by PSR-520 panel setting,

Clock, Start/Stop message will be received.

The start/stop of the song recording and playback will be controlled

by the external device. The initial set up data is transmitted before

the song playback, so that the start may be delayed.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 99 100 101

Comments to this Manuals

No comments