Yamaha PSR8000 Owner's Manual download pdf (Page 156)

156

Optional Hard Disk Installation

ZBefore installing the hard disk be sure to save any impor-

tant data to floppy disk by using the SAVE TO DISK

function described on page 141. Also remove the backup

batteries.

Turn the PSR-8000 power OFF and unplug the power

cord from both the AC wall socket and the instrument’s

rear panel. Turn the instrument upside down and rest it on

a blanket or other soft surface.

XRemove the four silver screws from the edge of the hard

disk cover in the corner of the instrument’s bottom panel.

These will be used later to attach the hard disk (step B).

CRemove the four black screws from the corners of the hard

disk cover, and remove the cover.

Installing Options

• Silver screws.

■ Hard Disk

The hard disk used must be a 2.5 inch IDE compatible

type with a capacity of 815 megabytes or more, but some

types may have different mounting requirements or may

not function properly. Yamaha recommends the follow-

ing hard disk units:

Toshiba MK0803MAT

Toshiba MK1003MAV

Fujitsu M2724TAM

• The maximum effective use of any hard disk used with the

PSR-8000 will be 780 megabytes, even if the hard disk itself

has higher capacity.

Please note that these recommendations may be changed

at a later date. Ask your nearest Yamaha representative or

an authorized distributor listed at the end of this owner’s

manual for information on the latest hard disk recom-

mendations.

Install a hard disk at your own risk. Yamaha will not be

held responsible for any damage or injury resulting from

improper installation or the use of a hard disk other than

one of the types recommended by Yamaha.

• Black screws.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 205 206

No comments

Yamaha PSR8000 Owner's Manual Page 156