Yamaha PSR8000 Owner's Manual download pdf (Page 134)

134

■ SYSTEM.................................................................................................................................................................................................

● LOCAL CONTROL

The LOCAL CONTROL parameters determine whether or

not the corresponding PSR-8000 parts/voices are controlled via

the PSR-8000 keyboard, sequence data, or accompaniment

playback.

When local control is on, the PSR-8000 keyboard controls

its internal tone generator, allowing the internal voices to be

played directly from the keyboard or internal data. Local con-

trol can be turned off, however, so that the PSR-8000 does not

play the specified voices, but the appropriate MIDI information

is still transmitted via the MIDI OUT connector. At the same

time, the internal tone generator responds to MIDI information

received via the MIDI IN connector. This means that while an

external sequencer or MIDI computer, for example, plays the

PSR-8000’s voices, an external tone generator can be played

from the PSR-8000.

Use the SONG, ACMP, M.PAD, LEFT, R1, R2, and LEAD

LCD dials to turn local control of the corresponding items ON

or OFF. A check mark appears in the appropriate LOCAL

CONTROL box in the upper part of the display when local

control of the corresponding part/voice is turned on.

● CLOCK & RECEIVE TRANSPOSE

The PSR-8000 “Functions”

CLOCK Determines whether the PSR-8000 is con-

trolled by its own internal clock or a MIDI clock

signal received from an external device.

INTERNAL is the normal CLOCK setting when

the PSR-8000 is being used alone. If you are

using the PSR-8000 with an external se-

quencer, MIDI computer, or other MIDI device,

and you want the PSR-8000 to be synchro-

nized to the external device, set this function to

EXTERNAL. In the latter case, the external

device must be connected to the PSR-8000

MIDI IN connector, and must be transmitting an

appropriate MIDI clock signal.

TRANSMIT Turns MIDI clock transmission ON or OFF.

When OFF, no MIDI clock or START/STOP data

is transmitted. Use the TRANSMIT CLOCK

dials to turn ON or OFF as required.

RECEIVE When the RECEIVE TRANSPOSE parameter

is turned OFF note data received by the PSR-

8000 is not transposed, and when set to ON

the received note data is transposed according

to the current PSR-8000 transpose setting.

CLOCK

TRANSPOSE

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 205 206

Comments to this Manuals

No comments

Yamaha PSR8000 Owner's Manual Page 134

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha PSR8000