Yamaha PSR8000 Owner's Manual download pdf (Page 137)

137

The PSR-8000 “Functions”

OFF No MIDI data is received.

XG/GM This is the “Multi-Timbre” mode in which the corresponding channel of the internal XG/GM tone

generator is directly controlled by the received MIDI data.

LEAD The LEAD part is controlled by the MIDI data received on the corresponding channel.

RIGHT 1 The RIGHT 1 part is controlled by the MIDI data received on the corresponding channel.

RIGHT 2 The RIGHT 2 part is controlled by the MIDI data received on the corresponding channel.

LEFT The LEFT part is controlled by the MIDI data received on the corresponding channel.

KEYBOARD MIDI note data received by the PSR-8000 plays the corresponding notes in the same way as if

they were played on the keyboard.

CHORD The received notes are used for chord detection for all accompaniment parts other than BASS.

ROOT The received note is used as the root note for the accompaniment BASS part only.

ACMP RHY1~2 The received notes are used as the accompaniment RHYTHM 1 and RHYTHM 2 notes.

ACMP BASS The received notes are used as the accompaniment BASS notes.

ACMP CHD1~2 The received notes are used as the accompaniment CHORD 1 and CHORD 2 notes.

ACMP PAD The received notes are used as the accompaniment PAD notes.

ACMP PHR1~2 The received notes are used as the accompaniment PHRASE 1 and PHRASE 2 notes.

PANEL CONTROL When this mode is selected the received MIDI data controls the PSR-8000 panel operations

rather than playing the internal tone generator. Which panel operations are controlled by which

types of MIDI data are specified in the PANEL CONTROL display page, described below.

VOCAL HARMONY Received notes are used as the added VOCAL HARMONY Vocoder type notes. The volume,

pan, detune, modulation, and pitch bend of the VOCAL HARMONY notes (for any type) can be

adjusted via control change or pitch bend data.

These “switches” turn reception of the specified data type on

or off. Use the NOTE, CNTCNG, PRGCNG, PITCHBND, and

AFTERTCH LCD dials to turn reception of the corresponding

data on or off. A check mark appears in the appropriate box

when the corresponding switch is turned on.

• When the receive mode is set to KEYBOARD, re-

ceived program change data switches the REGIS-

TRATION MEMORY setup.

• “-” is displayed for receive modes for which the switches

cannot be turned ON.

● NOTE, CONTROL CHANGE, PROGRAM CHANGE, PITCH BEND, & AFTER TOUCH SWITCH

(Control Change)

(Program Change)

(Pitch Bend)

(After-touch)

NOTE This switch turns reception of the note data on or off. When off, no notes will be produced by the

PSR-8000 even when note data is received on the selected channel.

CNTCNG Turns reception of control change data on or off. Control change data includes modulation wheel,

foot controller, and any other controller data (except the pitch bend wheel, which has its own

switch, below).

PRGCNG Turns reception of program change data on or off. Program change data corresponds to voice or

“patch” numbers, and will select the corresponding voices on the PSR-8000 when the PRGCNG

parameter is on.

PITCHBND Turns reception of pitch bend wheel data on or off.

AFTERTCH Turns reception of keyboard aftertouch data on or off.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 205 206

Comments to this Manuals

No comments

Yamaha PSR8000 Owner's Manual Page 137

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha PSR8000