Yamaha MBK YQ100 Service Manual download pdf (Page 73)

INSP

REG

3-30

4.Check:

•electrolyte level

The electrolyte level should be between the

minimum level mark 햳 and the maximum

level mark 햲.

Below the minimum level mark → Add distilled

water to the proper level.

Add only distilled water. Tap water contains

minerals which are harmful to the battery.

5.Check:

•specific gravity

Less than 1.280 → Recharge the battery.

Specific gravity

1.280 at 20

°C

6.Charge:

•battery

Battery charging amperage and

time

0.3 amps/10 hrs

Do not quick charge a battery.

• Loosen the battery sealing caps.

• To ensure maximum performance, always

charge a new battery before using it.

• Do not use a high-rate battery charger.

They force a high-amperage current into

the battery quickly and can cause battery

overheating and battery plate damage.

• If it is impossible to regulate the charging

current on the battery charger, be careful

not to overcharge the battery.

• When charging a battery, be sure to remove

it from the scooter. (If charging has to be

done with the battery mounted on the

scooter, disconnect the negative battery

lead from the battery terminal.)

• To reduce the chance of sparks, do not

plug in the battery charger until the battery

charger leads are connected to the battery.

• Before removing the battery charger lead

clips from the battery terminals, be sure to

turn off the battery charger.

CAUTION:

CAUTION:

WARNING

CHECKING THE BATTERY

+

UPPER

LOWER

햲

햳

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 231 232

Comments to this Manuals

No comments