INSP
REG
3-20
CHECKING THE BRAKE FLUID LEVEL
EAS00116
CHECKING THE BRAKE FLUID LEVEL
1.Stand the scooter on a level surface.
NOTE:
• Place the scooter on a suitable stand.
• Make sure the scooter is upright.
• In order to ensure a correct reading of the
brake fluid level, make sure the top of the
reservoir is horizontal.
2.Check:
brake fluid level
Below the minimum level mark 햲 → Add the
recommended brake fluid to the proper level.
Recommended brake fluid
DOT #3 or DOT #4
• Use only the designated brake fluid. Other
brake fluids may cause the rubber seals to
deteriorate, causing leakage and poor brake
performance.
• Refill with the same type of brake fluid that
is already in the system. Mixing brake fluids
may result in a harmful chemical reaction,
leading to poor brake performance.
• When refilling, be careful that water does
not enter the reservoir. Water will
significantly lower the boiling point of the
brake fluid and could cause vapor lock.
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean up
any spilt brake fluid immediately.
WARNING
CAUTION:
햲
Comments to this Manuals