ELEC
7-34
SIGNAL SYSTEM
5.Voltage
• Connect the pocket tester (DC 20 V) to the
flasher coupler.
Left flasher bulb
Pocket tester (+) lead
→→
→→
→ Chocolate 햲
Pocket tester (-) lead
→ →
→ →
→ Black 햳
Right flasher bulb
Pocket tester (+) lead
→→
→→
→ Dark green 햴
Pocket tester (-) lead
→→
→→
→ Black 햵
• Turn the main switch "ON".
• Set the "TURN" switch to "L", then to "R".
• Check the voltage (12 V) between
"chocolate" and the ground, then "Dark
green" and the ground.
MEETS
SPECIFICATION
This circuit is in good condition.
OUT OF SPECIFICATION
6.Connections
• Defect in the wire harness between the
main switch and the flasher bulb socket
→ Repair.
Refer to "WIRING DIAGRAM".
4.The "Oil" indicator light does not work.
1.Bulb and socket
Refer to "SWITCH INSPECTION".
CONTINUITY
NO CONTINUITY
2.Oil level switch
Refer to "SWITCH INSPECTION".
MEETS
SPECIFICATION
OUT OF SPECIFICATION
Replace buld and/or socket.
Replace oil level switch is defect.
B
Dg
Dg
B
12V10W
B
B
Ch
Ch
B
12V10W
B
햲
햴
햵
햳
Comments to this Manuals