Yamaha RX-V3300 Manual Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
69
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SET MENU
11 D-RANGE (dynamic range)
Use this feature to adjust the dynamic range. This setting
is effective only when this unit decodes Dolby Digital
signals.
Choices: MAX, STD, MIN
Initial setting: MAX (for both speakers and headphones)
MAX
Select the MAX setting for feature films.
STD
Select the STD (Standard) setting for general use.
MIN
Select the MIN setting for listening to sources at
extremely low volume levels.
11 D-RANGE
HP: MAX STD MIN
≥ SP: MAX STD MIN
12 SP DELAY
Use this feature to adjust the delay of the Center and the
Rear Center channel sounds. This feature works when
there is sound output from the center speakers with a
source like Dolby Digital or DTS, etc. Ideally, the Center
speaker and the Rear Center speaker should be the same
distance from the main listening position as the left and
right Main speakers. However, in most home situations,
the Center speaker or the Rear Center speaker is placed in
line with the Main speakers or the Rear speakers. By
delaying the sound from the Center speaker and the Rear
Center speaker, the apparent distance from the Center
speaker and the Rear Center speaker to the main listening
position can be adjusted to make it seem the same as the
distance between the left and right Main speaker, and the
left and right Rear speakers to the listening position.
Adjusting the delay time for the Center speaker is
especially important for giving depth to the dialogue.
1 Press k / n to select UNIT.
2 Press /+ to select the unit to be used for
setting.
Select one from msec, meters, and feet.
Notes
Setting items change depending on the unit chosen.
When meters or feet is selected, enter the distance from
your listening position to each speaker.
3 Press k / n to select the speaker for which
the delay is adjusted.
4 Press /+ to set the delay.
Press + for higher value and for lower value.
L
C
C
RC
R
RL
RR
RC
Center speaker image
12 SP DELAY
CENTER……………0.0ms
REAR CT…………3.0ms
≥ UNIT……………………msec
0109V3300_60-74_EN(UA) 02.7.24, 6:07 PM69
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 94 95

Comments to this Manuals

No comments