Yamaha RX-V3300 Manual download pdf (Page 68)

SET MENU

■ 1F FRONT EFCT SP (front effect

speaker mode)

This unit uses front effect speakers to localize the virtual

sound sources of the sound field programs. If you do not

use front effect speakers, you can direct the front effect

signals to the main speakers.

The OSD shows small or no front effect speakers

depending on how you set this item.

Choices: YES, NONE

Initial setting: YES

YES

Select this setting if you use front effect speakers.

NONE

Select this setting if you do not use front effect speakers.

The front effect signals are mixed with the main channels.

1F FRONT EFCT SP

YES NONE

1F FRONT EFCT SP

YES NONE

■ 1H SP B SET (speaker B set)

Use this feature to select the location of the main speakers

to be connected to the SPEAKERS B terminals.

Choices: MAIN, ZONE B

Initial setting: MAIN

MAIN

Select this to turn on/off SPEAKERS A and B when the

speakers connected to the SPEAKERS B terminals are set

in the main room.

ZONE B

Select this if the speakers connected to the SPEAKERS B

terminals are set in the second room. If SPEAKERS A is

turned OFF and SPEAKERS B is turned ON, all the

effect speakers in the main room are muted and the sound

is output only from SPEAKERS B.

• When a DSP program is selected, this unit automatically enters

the Virtual CINEMA DSP mode. If the headphones are

connected to PHONES jack on this unit in the Virtual

CINEMA DSP mode, this unit enters the SILENT CINEMA

DSP mode and the sound is output from both headphones and

SPEAKERS B.

1H SP B SET

-/+ : Select

/ : Exit

MAIN “ZONE B

■ 1G MAIN LEVEL (main level

mode)

Change this setting if you cannot match the output level

of the center, rear (L/R) and rear center speakers with the

main speakers because of the unusually high-efficiency

performance of the main speakers.

Choices: Normal, –10 dB

Initial setting: Normal

Normal

Select this if you can match the output level of your effect

speakers with that of your main speakers when using the

test tone.

Normal -10dB

1G MAIN LEVEL

Normal -10dB

1G MAIN LEVEL

1H SP B SET

-/+ : Select

/ : Exit

“MAIN ZONE B

–10 dB

Select this if you cannot match the output level of your

effect speakers with that of your main speakers when

using the test tone.

0109V3300_60-74_EN(UA) 02.7.24, 6:07 PM64

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 94 95

Comments to this Manuals

No comments

Yamaha RX-V3300 Manual Page 68

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V3300