Yamaha CRW2200S Owner's Manual download pdf (Page 53)

E-IDE (ATAPI) Connection Set Up

15 When using Windows 95/98/98 Second Edition/Me, follow Step 14

1414

14 to

open the “Device Manager” window, then double-click on the

“YAMAHA CRW2200E” icon to open the “YAMAHA CRW2200E

Properties” window, and click on the “Settings” tab to select it. A screen

similar to the one below appears. Make sure that the “Sync data

transfer” check box is not checked. (There is no need to set the “Sync

data transfer” check box if it does not appear.) By checking the “DMA”

check box, you can enable high-speed data transfer between the

CRW2200 drive and the computer. However, depending on your

computer system, this may cause operations to become unstable. If this

occurs, uncheck “DMA.”

* This is a screen shown in the Windows Me environment.

Notes

• Windows NT does not have the “DMA” setting. Nor do you need to set the “Sync data

transfer” parameter, since it will not appear.

• For Windows 2000 Professional

To set the “DMA,” log on as an Administrator. Open the “Device Manager” window, and

double-click on “IDE ATA/ATAPI controllers,” then double-click on the IDE Channel icon

connected to your unit. On the displayed window, click on the “Advanced Settings” tab,

and choose “Transfer Mode” to select it.

• Enabling or disabling the “Sync data transfer” option does not affect the

CRW2200E

About DMA Settings (Setting of Transfer Mode)

Recommended Setting

Details

Windows 95/98/98 Second Edition/Me

ON Unstable Operation, set OFF

Windows NT4.0 — No setting

Windows 2000 Professional DMA mode Unstable Operation, set PIO mode

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 69 70

No comments

Yamaha CRW2200S Owner's Manual Page 53