Yamaha CRW2200S Owner's Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
SCSI Connection Set Up
23
Note
The default setting of the Terminator switch is ON.
Block Size
The data block size of the CRW2200S can be set to 512 bytes per sector by
setting the Block Size jumper switch to “ON.” This is necessary when installing
the CRW2200S on a UNIX-based workstation. It is not necessary for Windows
95/98/98 Second Edition/Me/NT4.0/2000 Professional computers.
About the Block Size
Block Size shows the capacity of a sector that is the unit of data management of OS.
Note
By factory default, the Block Size jumper switch is set to “OFF” and should normally be left
in this state.
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
112244
Termination ON (Default) Termination OFF
Set to “ON” if
CRW2200S
is
last device on SCSI chain
Set to "OFF" if the
CRW2200S
is not the last device on the
SCSI chain
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
112244
Block size OFF (Default) Block size ON
Set to “ON” when installing
CRW2200S
on UNIX
workstation
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 69 70

Comments to this Manuals

No comments