Yamaha CRW2200S Owner's Manual download pdf (Page 17)

SCSI Connection Set Up

Make sure that the SCSI card to connect to the CRW2200S is installed beforehand.

(→P. 4)

Phillips Screwdriver

You will need to use this when removing the cover of your computer and when

mounting the drive. You may also need to temporarily remove the sound card to gain

access to the CD audio connectors, in which case, a small screw retaining the sound

card’s face plate has to be removed.

Note

Make sure your phillips screwdriver’s head is the correct size for the screws you need to remove.

Long-Nosed Pliers

You will need these to insert or remove the plastic shunts when setting the jumper

switches at the rear of the CRW2200S.

Tools

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 69 70

No comments

Yamaha CRW2200S Owner's Manual Page 17