Yamaha DTX700 Owner's Manual download pdf (Page 56)

DTX700 Owner’s Manual

Troubleshooting

For more troubleshooting tips, refer to the Reference Manual PDF document.

See page 5 for details on downloading this manual.

The DTX700 either produces no

sound or is unable to detect the

pads being struck.

•Ensure that the pads are correctly connected to the DTX700’s trigger input jacks.

•Ensure that the DTX700 is properly connected to headphones or an external audio system,

such as an amplifier and/or speakers. (See page 13.)

•Ensure that the amplifier and/or speakers connected to the DTX700 are turned on and are not

set to the lowest possible volume.

•Ensure that the [MASTER] knob is not turned down. (See page 19.)

•Ensure that the cables you are using are in good condition.

The DTX700 produces sound

but the sensitivity (i.e., volume)

is too low.

• If any of your pads feature a pad controller, ensure that they are turned up.

•Ensure that the sliders for the sounds in question are turned up. (See page 11.)

Double triggers are being pro-

duced.

If the pad in question features a pad controller, try turning it downward.

The DTX700 receives no switch

or trigger signals whatsoever.

Restore the default settings (i.e., the Factory Set). (See page 22.)

Sounds play endlessly and do

not stop.

Hold down the [SHIFT] button and press the [EXIT] button to silence all sounds.

The pad controller function

does not work as expected.

sure that you are using an XP100SD or another pad featuring a pad controller.

The hi-hat’s open and closed

sounds are not produced.

Ensure that the DBL BASS parameter is not turned on. (See page 32.)

The Factory Set (i.e., default set-

tings) needs to be restored.

See the instructions on page 22. They describe how to reset all internal DTX700 settings to their

default condition.

The DTX700 turns off unexpect-

edly.

Ensure that the Auto Power-Off function is not turned on. (See page 14.)

The Factory Set (i.e., default set-

tings) is restored whenever the

DTX700 is turned on.

Turn off the PowerOn Auto function. (See page 22.)

The kit changes whenever a new

song is selected.

By default, your DTX700 always chooses the best kit for each song. To prevent it from doing so,

turn on the Kit Lock function. (See page 39.)

Song parts (i.e., non-drum

parts) do not play.

Ensure that the accompaniment parts have not been muted. (See page 37.)

The click-track (or metronome)

does not play.

Certain sounds (such as snare

or kick) do not play.

Ensure that the sliders for the sounds in question are turned up. (See page 41.)

Drum kits cannot be changed by

turning the dial.

Ensure that the Kit Lock function is not turned on. (See page 39.)

erformances cannot be

recorded.

Recording is not possible while the Menu area is being accessed (as a result of pressing the

[MENU] button). Ensure that you leave this area before attempting to record a performance.

Hi-hat closed sounds are not

produced.

Refer to the Reference Manual PDF document.

Cubase Remote mode cannot be

deactivated.

See page 54 of this booklet.

dtx700_en_om.book Page 56 Friday, December 17, 2010 4:34 PM

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments

Yamaha DTX700 Owner's Manual Page 56

Comments to this Manuals

Related products and manuals for Music drums Yamaha DTX700