Yamaha DTX700 Owner's Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Basic Operation
22
DTX700 Owner’s Manual
Basic DTX700 Operations
NOTICE
If using a self-powered type USB memory device,
turning it on and off repeatedly could cause your
DTX700 to freeze and stop operating. The same
applies to the frequent plugging in and unplugging of
USB cables. Such action should, therefore, be
avoided.
Data stored on the DTX700 or within the USB mem-
ory device may be corrupted if they are disconnected
or turned off at the wrong time. Be sure, therefore, to
avoid unplugging the USB memory device from the
[USB TO DEVICE] or turning off either device while
data is being transferred.
Straight out of the box, your DTX700 already contains a wide
range of pre-programmed drum kits, instruments, and songs.
This collection of default settings – the Factory Set – can be
conveniently restored at any time if you have accidentally over-
written them or wish to delete all of your own settings. To do so,
use the Factory Set function as follows.
1 Press the [MENU] button.
2 Turn the dial to move the cursor to “Utility”.
3 Press the dial.
4 Turn the dial to move the cursor to “FactSet”.
5 Press the dial.
6 Press the [F3] button.
You will be asked to confirm that you wish to restore the
Factory Set.
If you do not wish to do so, press the [EXIT] button to
return to the previous page.
7 Press the dial to restore the Factory Set.
NOTICE
Whenever the Factory Set is restored, any settings
you have made will be overwritten with the corre-
sponding defaults. Important user-defined data
should, therefore, be saved on a USB memory
device in advance. For full details, refer to the Refer-
ence Manual PDF document.
NOTE
If you select the “PowerOn Auto” checkbox on the page
displayed for Step 6 above, the Factory Set will be
restored each time you turn on your DTX700.
Restoring Default Settings
dtx700_en_om.book Page 22 Friday, December 17, 2010 4:34 PM
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Comments to this Manuals

No comments