Yamaha MDX-595 Owner's Manual download pdf (Page 17)

English

TIME RESCUE RECORDING

The Time Rescue (TIME) recording function allows you to

start recording six seconds before you press record.

During record pause mode, the MD recorder monitors the

input signal and continuously maintains a six second

memory “cache”. Therefore, you can record a song that

just started without cutting off the beginning. You may find

this function useful when recording live broadcasts, or

when you want to start recording from the beginning of a

song without recording lots of commercials (etc.).

1 Press INPUT repeatedly to select the input

connected to the sound source you want to

record.

2 Locate the point where you want to start

recording.

3 Press REC ‡ to set this unit to record pause

mode.

The REC * indicators light up.

“REC Standby” and the amount of time available for recording

flash alternately in the display.

To adjust the recording level of digital or analog input

sources, see “Adjusting Recording Levels” on page 14.

4 Press TIME to start recording when you hear the

beginning of a song you want to record.

Recording starts from the memory cache, allowing you to

record from a point approximately six seconds before you

pressed TIME.

CHAR.TITLE SETDELETENUMBER

⁄

INPUT

›

SKIP

PAUSE

PLAY

‹

REC

STOP

MDX

CD-P

REC

SYNCTIME

M-MARK MONO/ST

MANUAL

Auto Marking

When making a recording, you can choose either

automatic or manual marking. This feature operates

somewhat differently for analog and digital signals. See

below for details.

Press M-MARK on the remote repeatedly to select

automatic (MANUAL indicator out) or manual

(MANUAL indicator lit) marking.

When recording analog signals

Auto : Track numbers are written in synchronization with

the input level of the signal being recorded. During

recording, if no sound is detected for more than 1.5

seconds, the recorder interprets this to be a gap between

two tracks. When the source signal is detected again, a

track number is automatically written.

Manual : One track number is written automatically when

you start recording, but none are written during recording.

To mark a track number, press M-MARK at the desired

position while recording.

Note

When using manual marking, the marks must be set at least 4

seconds apart.

When recording digital signals

Track numbers are written in the same positions as the original

source (CD, etc.) with either automatic or manual marking.

To add additional track numbers, set M-MARK to MANUAL

and press M-MARK at the desired position while recording.

Notes

• When recording is paused, the portion recorded up to the

pause is counted as an individual track. When recording is

resumed, a new track number is created. On the other hand, if

one track is recorded in continuous repetition, that track is

recorded as one continuous track with a single track number.

• During synchronized recording, manual track marking is not

possible.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Yamaha MDX-595 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Minidisc players Yamaha MDX-595