Yamaha MDX-595 Owner's Manual download pdf (Page 23)

English

COMBINE

This function lets you combine two consecutive tracks into

one. After you combine the tracks, the total number of

tracks decreases by one and the tracks following the

combined tracks are renumbered.

1 Press & to stop playback.

2 Turn the jog dial to select the second track of the

two you want to combine.

3 Press EDIT repeatedly to display “Combine ?”,

then press ENTER.

“Check” appears momentarily, then the unit plays the 4

seconds before and after the point where the tracks will be

connected. “(track number) + (track number) OK?” appears in

the display.

4 Press ENTER again.

The tracks are combined and “Complete” appears

momentarily.

To cancel before combining the tracks

Press CANCEL (or &).

To undo COMBINE

1 Press & to set this unit to stop mode.

2 Press EDIT repeatedly to display “Undo Combine”,

then press ENTER.

“Undo OK ?” appears in the display.

3 Press ENTER again to undo.

To cancel, press CANCEL (or &).

Notes

• This operation is not possible when track 1 is selected.

• You can also divide the track later using the DIVIDE function.

• If “Can’t Edit” appears in the display, the tracks cannot be

combined. This sometimes happens when you have edited

the same track many times. This is due to the technical

limitations of the MD system and is neither a mechanical error

nor a malfunction.

&#˜*

REC

)

EJECT

POWER

RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET

CANCEL ENTER

REC LEVEL PHONES LEVEL

INPUT

⁄

›



–

$ 



TIMER

OFF

PLAYREC

NATURAL SOUND MINIDISC RECORDER MDX–595

ANALOG

DIGITAL

REC LEVEL

3,4

CANCEL

DIVIDE

This function lets you divide one track into two separate

tracks by adding a new track number to a certain point in

the track. If you add a track number at the beginning of a

section you want to hear, you can access it quickly by

using the skip function during playback. After you divide a

track, the total number of tracks increases by one and the

tracks following the divided tracks are renumbered.

1 Press # /* to play the track you want to divide.

2 Use SEARCH ! or ⁄ to locate the point

where you want to divide the track, then press

#/* to pause at that position.

3 Press EDIT repeatedly to display “Divide ?”, then

press ENTER.

“Check” appears momentarily, then “Divide OK ?” appears

and the unit starts repeating the point where the track will be

divided.

4 If necessary, use the jog dial to adjust the

position of the point where the track will be

divided.

The divide position can be adjusted up to 2 seconds (255

steps) in either direction.

5 Press ENTER.

The track is divided and “Complete” appears

momentarily.

To cancel before dividing the track

Press CANCEL (or &).

To undo DIVIDE

1 Press & to set this unit to stop mode.

2 Press EDIT repeatedly to display “Undo Divide”, then

press ENTER.

“Undo OK ?” appears in the display.

3 Press ENTER again to undo.

To cancel, press CANCEL (or &).

Note

You can also combine the tracks later using the COMBINE

function.